Wastegate+Boost controller?
#1
Wastegate+Boost controller?
Ok, I have a t25 with stock actuator at 8psi. I want to make it 6psi and jeff gave me the idea of adding washers to the actuator mounting so it pushes the wastegate out a bit so it opens all the way under less pressure. The question is if I do this, set a spacer or washers to reduce boost and add a boost controller to adjust it, how will the controller work if the flap is already open a bit?
Thanks
Thanks
#2
Re:Wastegate+Boost controller?
The controller will still work as normal, remember you will get more lag once the gate is slightly open (with washers)
The boost controller only modifys the boost signal to the wastegate actuator.
Jeff
The boost controller only modifys the boost signal to the wastegate actuator.
Jeff
#6
Re:Wastegate+Boost controller?
Check out www.denverspeed.com he has a method to modify the waste gate rod to lower boost. I think it might be similar to Jeffs washer and spring method but I have not actually seen his before.
#7
Re:Wastegate+Boost controller?
http://www.denverspeed.com/wastegates.html
ya we did something similar to that on a T25 wastegate awhile back.. I never got to try it, so I dont know how well it worked.
Jeff
ya we did something similar to that on a T25 wastegate awhile back.. I never got to try it, so I dont know how well it worked.
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
hotrex
Forced Induction
9
10-05-2004 04:13 PM