using ext wastegate
09-24-2010, 10:24 AM
#11
1.5 BAR
Join Date: Oct 2009
Location: CHICAGO
Posts: 935
in order to clock the compressor housing you will need to remove the exhaust housing by removeing the bolts. once the exhaust housing is removed you can gain access to the snap ring on the compressor housing. you may need to purchase a strong snap ring plier to do this as the spring is pretty beafy. once the snap ring is loosened/removed you can spin/remove the compressor housing. make a mark on the compressor housing and the center housing for a reference when you put it back together beacuse it will try to move on you.
09-25-2010, 01:47 AM
#12
0.0 BAR
Thread Starter
Join Date: Aug 2010
Posts: 14
in order to clock the compressor housing you will need to remove the exhaust housing by removeing the bolts. once the exhaust housing is removed you can gain access to the snap ring on the compressor housing. you may need to purchase a strong snap ring plier to do this as the spring is pretty beafy. once the snap ring is loosened/removed you can spin/remove the compressor housing. make a mark on the compressor housing and the center housing for a reference when you put it back together beacuse it will try to move on you.
guess i go shopping for sum very strong snap pliers.
thanks alot for helping with infos.
Thread
Thread Starter
Forum
Replies
Last Post
