HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   turbo set up...want to beat a z28 (https://www.homemadeturbo.com/forced-induction-7/turbo-set-up-want-beat-z28-38939/)

MAJORAHOLE 05-04-2005 12:46 PM

turbo set up...want to beat a z28
 
allright i was wonderin if my turbo plan is gonna make enough hp to beat a z28.
here's the plan.

95 civic ex coupe(if it matters)
t-25(i have already,and DSM o2 housing)
mani (i have,but needs to be chopped and a flange welded on)
jrc budget 5"(don't have)
450cc DSM's(don't have)
Uberdata(don't have)
ACT Clutch(allready installed)
V-afc (allready installed)
MSD cap and Blaster SS coil (allready installed)
1g DSM blow Off(don't have)
IC piping(don't have)
Stock D16Z6

is it possible???
lemme know your thoughts/ideas

ghettoturbo 05-04-2005 12:49 PM

Re: turbo set up...want to beat a z28
 
unless its a 305...im betting you get your ass handed to you without a ton of boost. think about it...a 98+ z28 will run high 12s/low 13s with traction

projekteg 05-04-2005 12:55 PM

Re: turbo set up...want to beat a z28
 

Originally Posted by ghettoturbo
think about it...a 98+ z28 will run high 12s/low 13s with traction

technically, a stock one 'could', but really, i see guys take them out to the track all the time and run mid 13's at the VERY best sometimes.

ghettoturbo 05-04-2005 12:58 PM

Re: turbo set up...want to beat a z28
 
watch one with slicks :).....even at mid 13s they are pretty sick

projekteg 05-04-2005 01:00 PM

Re: turbo set up...want to beat a z28
 

Originally Posted by ghettoturbo
watch one with slicks :).....even at mid 13s they are pretty sick

yeah, i know with slicks, but chances are, he's asking about pulling on one on the highway, or a friendly street race, i doubt many guys with stock z28's even know what drag radials are :P

ghettoturbo 05-04-2005 01:04 PM

Re: turbo set up...want to beat a z28
 
eh...i still dont give him much of a chance. Near me, everything rwd is running around on slicks or drag radials :( ...so off a roll is your only chance. Anway, ditch that afc and take the cash to put towards other ----

ncervantes 05-04-2005 01:18 PM

Re: turbo set up...want to beat a z28
 

Originally Posted by MAJORAHOLE
allright i was wonderin if my turbo plan is gonna make enough hp to beat a z28.
here's the plan.

95 civic ex coupe(if it matters)
t-25(i have already,and DSM o2 housing)
mani (i have,but needs to be chopped and a flange welded on)
jrc budget 5"(don't have)
450cc DSM's(don't have)
Uberdata(don't have)
ACT Clutch(allready installed)
V-afc (allready installed)
MSD cap and Blaster SS coil (allready installed)
1g DSM blow Off(don't have)
IC piping(don't have)
Stock D16Z6

is it possible???
lemme know your thoughts/ideas

Uhhh...not gonna happen with your setup. You'll be lucky to hit a 14.5 in that heavy ass EG. Try dropping in a GSR with a T3/T4. :P

MAJORAHOLE 05-04-2005 01:22 PM

Re: turbo set up...want to beat a z28
 
i just wanna be able to at least keep up with a bone stock one. i hate it when those fags try and ---- with me. my friend has a 94z28 and at the track stock his beat run was 14 i think, it is an auto though.

and i don't have the money to get a gsr motor or a t3t4

what about rustang gt's, i hate those turds too.

ghettoturbo 05-04-2005 02:08 PM

Re: turbo set up...want to beat a z28
 
just turbo your car and then se if you can beat them, no sense imagining it

MAJORAHOLE 05-04-2005 02:12 PM

Re: turbo set up...want to beat a z28
 
ya i guess. i got a question about IC piping to. do you have to remove your wiper fluid tank to get the piping around??


All times are GMT -5. The time now is 06:12 AM.


© 2024 MH Sub I, LLC dba Internet Brands