HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   turbo question? (https://www.homemadeturbo.com/forced-induction-7/turbo-question-69618/)

racer66 11-06-2006 03:14 PM

turbo question?
 
do you guys think it would be ok to put a turbo on my car with all the oil and coolant lines hooked up but no charge piping.because i still need to drive my car but i want to start putting the turbo on.just dont have time to do it one time.

AJxr 11-06-2006 03:19 PM

Re: turbo question?
 
use common sense

JFP-91 CRX 11-06-2006 03:27 PM

Re: turbo question?
 

Originally Posted by AJxr
use common sense


ryan89crx 11-06-2006 03:40 PM

Re: turbo question?
 
no charge pipes? lol, good idea. think about how fast a turbo spins when there is resistance in the charge pipes and a WG to let excess exhaust gasses pass...

now think about how fast your turbo will spin with no piping and no way to slow it down....

McBoost 11-06-2006 04:53 PM

Re: turbo question?
 
Just in case you didn't get what ryan89crx is trying to tell you, there is such a thing as a turbo overspinning.

If the air isn't going anywhere, the turbo has no resistance and can be damaged by high turbine RPM's.

igotnothin 11-06-2006 04:54 PM

Re: turbo question?
 
do it and put your finger in the balde. i always wanted to see what would hapen

evo_lucian 11-06-2006 10:59 PM

Re: turbo question?
 
Common sense... Some of us have it, others dont

kamilk69 11-06-2006 11:07 PM

Re: turbo question?
 
1 Attachment(s)
This is what happens when you overspin your turbo.

Attachment 31492

evo_lucian 11-07-2006 12:00 PM

Re: turbo question?
 
Is the turbo in the pic yours? To the OP try getting a spare motor to build. Or take the bus to work

Atticus 11-11-2006 11:59 PM

Re: turbo question?
 
the only way you could pull this off is if you keep your waste gate open all the time
how?
well the only thing I can think of is not putting the waste gate on and having a hole in the manifold
just keep in mind you might get pulled over for the noise


All times are GMT -5. The time now is 11:10 PM.


© 2024 MH Sub I, LLC dba Internet Brands