HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - turbo piping (https://www.homemadeturbo.com/forced-induction-7/turbo-piping-55784/)

D15Bastard

02-12-2006 11:52 PM

turbo piping

what size piping should i go with, if Im using a IHI ford probe turbo? 2.5 or 3" need to get piping down NOW and need to know what size to use. thanks

zestyskater69

02-12-2006 11:55 PM

Re: turbo piping

2.5 is just fine, 3 if you really think you need it, 2.25 if you dont care ;)

NBLKID

02-12-2006 11:58 PM

Re: turbo piping

u wont need 3 inch piping with that turbo, i would go anywhere from 2-2.5

NCHATCH

02-13-2006 12:00 AM

Re: turbo piping

go woth the same size as you turbo outlet for the pipe entering the intercooler, and a half inch size larger when leaving the cooler, just a rule of thumb

D15Bastard

02-18-2006 06:02 PM

Re: turbo piping

went with 2-2.5 thanks

UltimX

02-19-2006 02:28 PM

Re: turbo piping

Quote:

Originally Posted by NCHATCH

go woth the same size as you turbo outlet for the pipe entering the intercooler, and a half inch size larger when leaving the cooler, just a rule of thumb

What if the IC outlet to the IM is 2" aswell? should you still step to 2.5?

jacob_kohler

02-20-2006 11:09 AM

Re: turbo piping

Not sure, But I did 2 inch from compressor to intercooler. My end tanks on the intercooler are 2.5 so I just got reducers then I ran 2.25 out the other side of the intercooler to the TB

All times are GMT -5. The time now is 01:10 PM.