HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   turbo oil scavenge pump (https://www.homemadeturbo.com/forced-induction-7/turbo-oil-scavenge-pump-48608/)

NOSracerX 10-22-2005 02:54 PM

turbo oil scavenge pump
 
ive had a few different turbos on my dp-fi ed3 from junkyard t3s to new ihi rhb5s. no matter what my set up has been or what ive done to try and fix it, my car smokes like a freighttrain. i priced a kit 4 a westech oil scavenge pump @ $205 + s&h.... ....ouch. what would i need 2 build a unit myself that's reliable and cost effective? anyone out there done this b4?

p.s. anyone got the parts i would need 4 mp-fi? resistor box, ecu, manifold, sensors, t.b., fuel rail, injectors, pressure regulator, (am i forgetting anything).

Martian 10-22-2005 07:31 PM

Re: turbo oil scavenge pump
 
shurflow 8000 $50 at any tractor supply or RV supply. 60psi, 6 gpm. Rated max temp operation 180F heard of it used daily at 200F

J-SMITH69 10-22-2005 08:22 PM

Re: turbo oil scavenge pump
 
smoking problems? do you have a wierd oil return? have you tried restricting the oil flow to the turbine?

NOSracerX 10-29-2005 08:46 PM

Re: turbo oil scavenge pump
 
yes, i have put in a needle valve after the cooler b4 the turbo; that's how i blew my last turbo. i kept turning the pressure down to stop the smoke, but i went too far and twisted the turbine shaft in half meanwhile sending shrapnel into my d15 with fresh bearings. my oil return in just a normal barbed fitting mounted high up on the pan and angled as upwards as possible. i just don't get why the smoking persists.

thanks 4 the tip on the pump for tractor use; that's about a quarter of what i was gonna pay 4 the westtech unit 8)

con 10-29-2005 09:40 PM

Re: turbo oil scavenge pump
 
Post picks because everyone elses works fine with no pump. Either you have some fucked up turbos or your drain is built by retarded midgets. :y

whiterice 10-29-2005 09:42 PM

Re: turbo oil scavenge pump
 
have you run an oil pressure gauge after the restrictor before the turbo?
you should know how much psi is going to the turbo.
hopefully with the electric oil pump, the pressure will be constant regardless of rpms.

con 10-29-2005 09:46 PM

Re: turbo oil scavenge pump
 

Originally Posted by whiterice
hopefully with the electric oil pump, the pressure will be constant regardless of rpms.

the pump doesn't feed the turbo ::)

whiterice 10-29-2005 09:50 PM

Re: turbo oil scavenge pump
 
so this is used to suck the oil from the turbo back to the oil pan? Nice.
For others:
http://westech.home.mindspring.com/p...s/scvpump3.htm

con 10-29-2005 09:53 PM

Re: turbo oil scavenge pump
 

Originally Posted by whiterice
so this is used to suck the oil from the turbo back to the oil pan?

there you go little guy ;)

hotrex 10-30-2005 06:32 AM

Re: turbo oil scavenge pump
 
westech sells a scvange pump for this specific application. the camaro guys use it on their sts kits.

http://westech.home.mindspring.com/propages/scvpump.htm


All times are GMT -5. The time now is 06:47 AM.


© 2024 MH Sub I, LLC dba Internet Brands