turbo mustang?
#1
turbo mustang?
hey i am new here but i have a 88 5 liter mustang i was wondering what turbo would you use on it from a jusk yard. i have a 2.2 dodge turbo off a 85 new yourker not sure wat size tho or i could possibly get a 91 talon tdo5h. but i was wondering if any one had any ideas wat they would use. not only for the turbo the injectors fuel pump regulator management etc thanks
#2
Re: turbo mustang?
you suck at searching... welcome to hmt noobie im sure random strike will be chiming in anytime soon ... and either of those turbos is two small..... possibly 2 of the yorker turbos on a tt setup ... i would go with a twin setup but thats just my preference im not a big v8 guy
#4
Re: turbo mustang?
Originally Posted by matt5liter
thanks i have done research but i was just checking to see wat anyoneelse would have in mind i now have another yorker turbo lined up i am hoking this will be alrite for a setup
two chyslers or two td0h5s
they both are on the small side but the chyslers work well
if you want a single id check out one of the bigger diesel turbos
#6
Re: turbo mustang?
For ease and setup, a twin turbo on a V motor is the way to go.
How much power are you looking to achieve from the completed setup? When you get this question answered, then you can start shopping for turbo(s) that will be well suited for your setup. If you're looking for about 450-575hp, then 2 of the Chrysler turbos will work well. They are about maxed out at 410 cfm and that equates to roughly 250-275hp depending on the motor. The only thing is that these turbos have the .48 A/R turbine housing. And this will choke out your upper rpm power. The best turbos for a twin setup would be a pair of Ford 2.3L Manual turbos. 60 trim compressor and a turbine housing of .63 A/R. Each rated to over 300hp per turbo and the turbine won't choke out your exhaust and limit upper rpm power.
If you want to go with a single turbo, then a 7.3L turbo would be right about what you're looking for if you want about 600-675hp.
Good luck and keep us posted with your project,
How much power are you looking to achieve from the completed setup? When you get this question answered, then you can start shopping for turbo(s) that will be well suited for your setup. If you're looking for about 450-575hp, then 2 of the Chrysler turbos will work well. They are about maxed out at 410 cfm and that equates to roughly 250-275hp depending on the motor. The only thing is that these turbos have the .48 A/R turbine housing. And this will choke out your upper rpm power. The best turbos for a twin setup would be a pair of Ford 2.3L Manual turbos. 60 trim compressor and a turbine housing of .63 A/R. Each rated to over 300hp per turbo and the turbine won't choke out your exhaust and limit upper rpm power.
If you want to go with a single turbo, then a 7.3L turbo would be right about what you're looking for if you want about 600-675hp.
Good luck and keep us posted with your project,
#8
Re: turbo mustang?
thanks alot guys i just figured these would be alrite for the car seen how i am getting toem for next to nothing but if i can come across the ford i will put them on instead also erich can u send me some pics of yurs if you dont mind
Thread
Thread Starter
Forum
Replies
Last Post
J-SMITH69
General Discussion
91
11-18-2006 12:40 AM
Sdlonyer55
Forced Induction
15
06-09-2003 09:38 PM