Turbo mounting????'s
#1
Turbo mounting????'s
ok i bought this turbo a while ago...and i noticed one of the holes to mount it was kinda welded closed..also i aint going to be able to mount it fully either...because of the hf mani..could i bolt it on with 3 bolts...or will it leak?? any suggestions?
here are some pics to help you help me
here is the hole that is welded
if you look in the middle of the pic you can see where the bolt would go up into the turbo housing...but on my hf i have no holes that go through it to put a bolt through?...how am i suposed to put a bolt to mount it their?
here is the top of my hf mani
i plan on putting the turbo on tomorrow if its possible...doesn anyone have any ideas
here are some pics to help you help me
here is the hole that is welded
if you look in the middle of the pic you can see where the bolt would go up into the turbo housing...but on my hf i have no holes that go through it to put a bolt through?...how am i suposed to put a bolt to mount it their?
here is the top of my hf mani
i plan on putting the turbo on tomorrow if its possible...doesn anyone have any ideas
#4
Re: Turbo mounting????'s
i cant use a nut because the bolt doesnt go all the way through..but im going to re tap the housing.. and then drill a hole through the adapter plate to match the hole...problem solved..and i'll use a thicher gasket to make sure it stays sealed ..if any other suggestions let me know thanks-Zach
Thread
Thread Starter
Forum
Replies
Last Post
pa2play
Forced Induction
2
05-14-2004 06:53 PM
street_kings
Forced Induction
18
02-18-2004 05:22 PM