HomemadeTurbo - DIY Turbo Forum - Turbo install help

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - Turbo install help (https://www.homemadeturbo.com/forced-induction-7/turbo-install-help-34111/)

Hyaboosta

01-28-2005 11:12 AM

Turbo install help

Im about to install my custom kit on my 02 civic and I was wondering if anyone used anything when boting up the turbo to mani,down pipe to turbo,WG to mani, or dump tube to WG?I have seen some people use copper spray but has anyone used a gasket or anything?

Carnesd

01-28-2005 11:14 AM

Re:Turbo install help

you should use gaskets if you can get them. If your sure that the flanges are perfectly straight then you might be ok.

93turbo16

01-28-2005 11:15 AM

Re:Turbo install help

I always use a gasket, unless the surfaces are perfect and will seal each other. But I usually just put a gasket in there to be safe.

chu77

01-28-2005 11:37 AM

Re:Turbo install help

don't forget to change the bolts

Hyaboosta

01-28-2005 11:57 AM

Re:Turbo install help

all grade 5 bolts right

Jeter2Karaffa

01-28-2005 04:58 PM

Re:Turbo install help

i use the permanex high temp liquid gasket stuff i found at auto zone. works fine actually and was only a few bucks

All times are GMT -5. The time now is 10:48 PM.