turbo install...having problems with the WG hitting the block***my pics***
 

so as the title says, i am trying to install my turbo, i tried to get everything "mocked up" today, but the wg is hitting the block. i already cut out part of the enigne mount. it still hits the dam block. >:(

my set-up, T3, HF manifold, bmc adaptor plate.

i think im ------ something up or missing something really simple. i am setting my turbo just like this:
https://www.homemadeturbo.com/turbo_...me_car_1_P.jpg
(jeffs install from the main page) but i had the compressor housing facing down. this shouldnt matter should it? can i smash the WG a little? WTF am i missing. no pictures on mine. :-\
edit
here are pictures of my set-up on hotrexs old motor. (which is inside my house) but you get what i am talking about
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

can i take out that spot where the old mount was (or where i cut it)

Re:turbo install...having problems with the WG hitting the block
 

You may be able to reposition the WG so that it doesn't hit the block. Or shave some of the webbing on the block.

Re:turbo install...having problems with the WG hitting the block
 

https://www.homemadeturbo.com/turbo_..._setup_2_P.jpg
https://www.homemadeturbo.com/turbo_...-install_P.jpg

it looks like jeff shaved the block a little....
https://www.homemadeturbo.com/turbo_.../t25_ek_hatch/

i would just be worried about going through the block. :P

Re:turbo install...having problems with the WG hitting the block
 

Good luck with the grinder. If you see coolant, you went too far. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:turbo install...having problems with the WG hitting the block
 

I had the same problem with mine so I just made a manifold.

Re:turbo install...having problems with the WG hitting the block
 

yeah, but everyone uses the hf manifold, so why not use it. i wanna know how people make it work. ;)

Re:turbo install...having problems with the WG hitting the block
 

It would be kind of a pain in the ass to set everything up again, but if you turned the turbo around, your problem would be solved. The only trouble is that the downpipe gets a little wierd to make.

Re:turbo install...having problems with the WG hitting the block
 

No that doesn't work either. The only way to make it work it to mount the waste gate actuator on the block and get a threaded rod long enough to make it to the waste gate.

Re:turbo install...having problems with the WG hitting the block***my pics***
 

my pics added at the top.

Re:turbo install...having problems with the WG hitting the block***my pics***
 

i had that problem, i acutally modifyed the wastegate brcket so that it cleared. instead of using two bolts to hold it onto the compressor housing i used one and bolted it as close to the manifold as possible...plus i cut it some too