HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - turbo b16 HELP (https://www.homemadeturbo.com/forced-induction-7/turbo-b16-help-50271/)

novtecdohc

11-17-2005 04:37 PM

turbo b16 HELP

when will the turbo hit full t3 42/48? and is the turbo good for 240whp goal on a stock b16?
is the oil inlet threag or ehile i have to buy a oil inlet flange.

djfob

11-17-2005 05:05 PM

Re: turbo b16 HELP

Turbo will probably fully spool by 3-3.5k, it's a pretty small turbo for that motor. It'll hit 240 whp but it'll run out of breathe up top, I'd suggest at least a 48/60 t3. Most t3s have a threaded 1/8 inlet.

novtecdohc

11-17-2005 05:43 PM

Re: turbo b16 HELP

just going to use for a few months. them i will get a bigger turbo maybe a t3t4 60/63 57 trim
on that 1/8 thread are volvo and saab turbo threaded

djfob

11-18-2005 03:19 AM

Re: turbo b16 HELP

either way if it's not threaded just tap it

All times are GMT -5. The time now is 10:38 PM.