Turbo 2 Stroke Carb'd
Hey, i'm new here I searched around the forums and found some stuff nothing too specific.
Anyways i just finished Throwing a turbo onto an older snowmobile i got for free. Its a Turbo off of a Ford Probe (1990 i think) Mikuni Carb 1982 377 Skandic Sled Anyways i was just wondering if anyone has done any tuning on this sort of a set up. Or just some info on this sort of thing I got 4-5 psi out of it today with nothing restricting the exhaust. Ill post some pictures tomorrow. |
what did you do to the fuel system to run 4-5 psi? turboing carb engines are very tough to tune not to mention your doing it with a 2 stroke engine which makes it even harder.
|
I had a Jet off of a 198x (low 80's) Arctic cat 5000 Same carb bigger jet...Thats all i've done to it.
|
2 Attachment(s)
|
I've looked into turboing a two stroke before, most people said it seemed unlikely to improve performance because two strokes have open ports so any boost made would likely escape through the exhaust port. I'm hoping you prove that theory incorrect, keep us updated.
|
what are you going to do about turbo oil feed and drain? theres no engine oil pressure or crankcase so your going to need an oil pressure supply pump and a return sump to lubricate the turbo.
did you check the a/f ratio when you did this 4-5 psi run? |
if you have video capabilities, i would love to see a video of it running and going into boost.
|
I have some more pictures ill post later on.....I can get video maybe sunday as i am out for the weekend
|
Originally Posted by busa4
(Post 1304986)
if you have video capabilities, i would love to see a video of it running and going into boost.
|
3 Attachment(s)
So Here is what i did for my oil setup. I Managed to run it off of The existing Light wiring that was there...
Attachment 4717 Close up of the Kraft Peanut butter container full of oil and a Bilge Pump Attachment 4718 Attachment 4719 |
All times are GMT -5. The time now is 06:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands