HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   tryin to make 400whp quick question (https://www.homemadeturbo.com/forced-induction-7/tryin-make-400whp-quick-question-89359/)

Acrite3404 02-23-2008 12:18 PM

tryin to make 400whp quick question
 
ok last time i asked a question yall bitches ragged on me for like 4days :y (lol) cause i had the ebay turbo now im out of that and tried to go a different route this time.
ok me and a friend are building my LSv turbo and I want 400whp, i thinkI will make it tell what u guys think.

Ls bottom-end
eagle rods
arias 9:1
itr oil pump

GSR head
Skunk 2 valvetrain springs, retainer, and valves,
stock gsr cams might be upgrading to Itr's
blox im
65mm professional products throttle body
RC 550's

Turbo Set-up
SLS shorty manifold
Precision SC34
3" dp with Qtp cut-out
tial 38mm WG
No Name FMIC
Blitz type rs

Tuned on Crome
he plans on max boost at 17lbs
Do i need bigger injectors?
and should it make 400whp by 17lbs?

hotrex 02-23-2008 12:20 PM

Re: tryin to make 400whp quick question
 
injectors need to be bigger

and other than that ---- you , your a loser faggot 17 lbs is ----- ----, 20 psi minimum

Acrite3404 02-23-2008 12:26 PM

Re: tryin to make 400whp quick question
 
hahaha yea well im not sleeved so i really dont wanna go past 17lbs

jarebear667 02-23-2008 01:44 PM

Re: tryin to make 400whp quick question
 
haha whats the difference? is the the majic number they are using on honda-tech now?

vortecfiero 02-23-2008 01:47 PM

Re: tryin to make 400whp quick question
 
why 9:1 compression ratio ?

Acrite3404 02-23-2008 02:01 PM

Re: tryin to make 400whp quick question
 
with the gsr head it will put at like a 10:1 10:2

jarebear667 02-23-2008 02:03 PM

Re: tryin to make 400whp quick question
 
keeps away detonation for one, kinda like a safety zone? and arias doesnt make a 9.5 or 10? i think they make a 10.5 i wish i could of had 9 or 9.5 but im down to 8.5 haha :-\

vortecfiero 02-23-2008 02:30 PM

Re: tryin to make 400whp quick question
 
i should rephrase that.. lol why so high ?
would head work help drop it down ?

Acrite3404 02-23-2008 05:26 PM

Re: tryin to make 400whp quick question
 
its perfect for me its like a gsr compression so no lag and good power

rudebwoy 02-23-2008 05:35 PM

Re: tryin to make 400whp quick question
 
*injectors atleast 750cc maybe 650cc
*255lph fuel pump
*more boost
if you want 400whp you will go to whatever it takes to make that power.
I want 500 so if I need to 50psi to make it I will.
9.0.1 compression sounds ok
I went with 8.8.1 on my setup since pump gas is all I have access to.

HMTguy 02-23-2008 05:37 PM

Re: tryin to make 400whp quick question
 

Originally Posted by rudebwoy
*injectors atleast 750cc maybe 650cc

lol

rudebwoy 02-23-2008 05:56 PM

Re: tryin to make 400whp quick question
 
too big too small? I am no internet expert I just checked the calculator from RC
I am trying to make 500whp with 750cc on a 2.0l

HMTguy 02-23-2008 08:06 PM

Re: tryin to make 400whp quick question
 
No it's fine just the way you worded it

TwoLoudnproud 02-23-2008 08:25 PM

Re: tryin to make 400whp quick question
 
For 400 hp you would need at lest 580cc.
http://www.nolimitmotorsport.com/pre...injectors.html

TorganFM 02-23-2008 08:35 PM

Re: tryin to make 400whp quick question
 
And that's most likely crank hp... figure 750cc's

TwoLoudnproud 02-23-2008 09:20 PM

Re: tryin to make 400whp quick question
 

Originally Posted by TorganFM
And that's most likely crank hp... figure 750cc's

why buy 750cc when you can get 1600cc that will get the job done and some :6

Acrite3404 02-23-2008 09:30 PM

Re: tryin to make 400whp quick question
 
yes i have the 255lph fuel pump

BigBird 02-23-2008 09:35 PM

Re: tryin to make 400whp quick question
 

Originally Posted by TwoLoudnproud
why buy 750cc when you can get 1600cc that will get the job done and some :6

They idle like poop.

Acrite3404 02-23-2008 10:16 PM

Re: tryin to make 400whp quick question
 
yea i had 880's the idle sucked but hey

TwoLoudnproud 02-23-2008 10:30 PM

Re: tryin to make 400whp quick question
 
---- idle it all about topend ;D

spekter 02-24-2008 01:56 AM

Re: tryin to make 400whp quick question
 
if it doesn't make mad veetaaakk powah at like 12,000 rpms it ain't worth driving

one2many 02-24-2008 02:08 AM

Re: tryin to make 400whp quick question
 

Originally Posted by spekter
if it doesn't make mad veetaaakk powah at like 12,000 rpms it ain't worth driving

you, kill yourself now ! troll.

spekter 02-24-2008 02:30 AM

Re: tryin to make 400whp quick question
 
Got something against maaaaaaad veeetaaaakkk? All the lag, none of the boost? Don't hate, just get a life, that's all. Oh, and eat my penis, butt pirate. one2many cocks in the eye socket? I think so.

By the way, 400 hp front drivers are a shitload of fun. This build will be a crapton of sweetness when it's done.

one2many 02-24-2008 09:48 PM

Re: tryin to make 400whp quick question
 

you fail faggot !



Zriuz 02-26-2008 02:26 AM

Re: tryin to make 400whp quick question
 
I seen 450 to the wheels on a gt35r bone stock b16... but the BC stage III cams and springs.. my rival area code tuner made it tho.. i give him props tho ::)

b18. 02-26-2008 03:17 AM

Re: tryin to make 400whp quick question
 

Originally Posted by Zriuz
my rival area code tuner made it tho..

Johnny Tran just picked up two tanabe super medallion exhausts and two motec units...


they aren't messing around.


All times are GMT -5. The time now is 08:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands