too big for z6?
 

whats up fellas ... do you guy think a 60/63 t3 from a 300zx is to big for my cousins soon to be semi built z6 .. 9:1 c/r stock head tt rods mini ram mani .. do you think thats to big for onlt reving to 7200 ... thinking of running about 10-12 psi onthe 60-63 with uber for tunning ...just ask for more details if you need any ... the other turbo he'd run its a 48/49 off of a sunbird t2 with greddy t2 mani

Re: too big for z6?
 

not anywhere close to being too big. i have the same turbo on my stock b16 and at 12psi it rips hard.

Re: too big for z6?
 

werd .... i know there nice for b16 just wondering if it will run good on a z6 ... what will full boost hit at ?? 4-5

Re: too big for z6?
 

too smallllllll
4k full boost

Re: too big for z6?
 

werd.. cause he has a 48/49 right now and full boost doesnt hit until almost 5k .. the wastegate flapper is bent or warped

Re: too big for z6?
 

it will be fine

Re: too big for z6?
 

if i built a 9:1 c/r z6 with tt rods i'd be using a bigger turbo than a 63/60 t3... i'd say go with a 60 trim t3/to4e....or maybe a t3 60-1? a built z6 needs a decent turbo as much as a built b16/b18 needs it, you should get big ass injectors, a walbro fuel pump, a 3 bar map sensor, and tune that bitch at like 20 psi, why build a motor, then put a small turbo on it and ---- around with 12 psi???

Re: too big for z6?
 

its a good size turbo. i had one for my y7 setup.

Re: too big for z6?
 

i wish I would have went smaller on my set-up. IDK, i myself like instant boost. oooo yeah, i had a .42/.48
with a turbo that size, your not gonna get full boost till probably 4200-4500rpms. be enough for the powerband, but its gonna be a dog before that. :-\

Re: too big for z6?
 

10.5psi on my .42/.48 by 3700rpm; however, that is on stock motor and stock compression. I'm in the process of doing the .60 swap so why not a .63/.60?


JP