The time has come....
02-01-2005, 10:42 AM
#1
0.5 BAR
Thread Starter
Join Date: Dec 2003
Posts: 191
The time has come....
I am ready to get the remaining parts for my junkyark turbo setup. what i have already for the sohc
Manifold
turbo t-3 saab 900
ecu(uberdata)
dsm 1st gen 450cc inj
dodge stealth bov
oil feed line
oil return bracket thing for turbo
intercooler(jrc 6inch)
Things i need are piping for intercooler, some sort of downpipe, resistors for injectors, couplers or radiator hose with large enough diameter for piping, and some sort of wastegate. I think i may rig the wastegate as my manifold allows for an external, but here in lyes the problem. I have to get this done on little over 200.00.
Where do i go from here?
Manifold
turbo t-3 saab 900
ecu(uberdata)
dsm 1st gen 450cc inj
dodge stealth bov
oil feed line
oil return bracket thing for turbo
intercooler(jrc 6inch)
Things i need are piping for intercooler, some sort of downpipe, resistors for injectors, couplers or radiator hose with large enough diameter for piping, and some sort of wastegate. I think i may rig the wastegate as my manifold allows for an external, but here in lyes the problem. I have to get this done on little over 200.00.
Where do i go from here?
02-01-2005, 11:02 AM
#5
3.0 BAR
Join Date: Aug 2003
Posts: 3,930
Re:The time has come....
he already has a intercooler 
you still gotta worry about tapping your oil pan aswell, and new oil and filter. I'm pretty sure radioshack discontinued the resistorss, so hitting up a junkyard or a forsale forum you should be able to find them real cheap, there are other cars other then the 88-91 civic/crx si that have them.
Go with the internal wastegate that came with your t3, your budget doesn't allow for any sort of decent external one, unless ofcourse you were to get your hands on a audi one and make a mount for it.
look in your local phone book, there should be wherehose distributor for hoses and lines, every major city usually has one, they will carry 2inch and 2.5 inch and possibly 2.25 ID hose of different qualities (silicone, rubber, double thickness) these are usually designed for rad hose on semis. The stuff is relitevly cheap, about 10-15 bucks a foot. you can also get your oil drain line hose from here too, they usually carry a steel braided version that runs for about 6 dollars a foot.
exhaust shops throw out pipe all the time, mandrel bends are usually hard to find locally but if you hit up some performance shops they can usually direct you in the right place. U bends can be really expensive. ebay is also a good choice for them. You can sometimes just amke your bends/chargepiping out of random inlet tubes from junked cars, lol.
You will need one u bend for your downpipe+a flex pipe+gasket+o2 bung+flaunge. Plus a couple feet of 2.5 if you plan on getting rid of your cat.
you still gotta worry about tapping your oil pan aswell, and new oil and filter. I'm pretty sure radioshack discontinued the resistorss, so hitting up a junkyard or a forsale forum you should be able to find them real cheap, there are other cars other then the 88-91 civic/crx si that have them.
Go with the internal wastegate that came with your t3, your budget doesn't allow for any sort of decent external one, unless ofcourse you were to get your hands on a audi one and make a mount for it.
look in your local phone book, there should be wherehose distributor for hoses and lines, every major city usually has one, they will carry 2inch and 2.5 inch and possibly 2.25 ID hose of different qualities (silicone, rubber, double thickness) these are usually designed for rad hose on semis. The stuff is relitevly cheap, about 10-15 bucks a foot. you can also get your oil drain line hose from here too, they usually carry a steel braided version that runs for about 6 dollars a foot.
exhaust shops throw out pipe all the time, mandrel bends are usually hard to find locally but if you hit up some performance shops they can usually direct you in the right place. U bends can be really expensive. ebay is also a good choice for them. You can sometimes just amke your bends/chargepiping out of random inlet tubes from junked cars, lol.
You will need one u bend for your downpipe+a flex pipe+gasket+o2 bung+flaunge. Plus a couple feet of 2.5 if you plan on getting rid of your cat.
02-01-2005, 11:06 AM
#6
3.0 BAR
Join Date: Apr 2003
Posts: 11,058
Re:The time has come....
Originally Posted by Spenser
I'm pretty sure radioshack discontinued the resistorss, so hitting up a junkyard or a forsale forum you should be able to find them real cheap, there are other cars other then the 88-91 civic/crx si that have them.
no they didn't, i just bought some two days ago http://www.radioshack.com/product.as...5Fid=271%2D132
02-01-2005, 11:08 AM
#7
3.0 BAR
Join Date: Aug 2003
Posts: 3,930
Re:The time has come....
God damn us canadians are always getting ripped off, last time I was in there, I had to go to 4 different locations to get the last ones in the city, they told me they were discontinued. thanks for the correction kevin.
02-01-2005, 11:09 AM
#8
3.0 BAR
Join Date: Apr 2003
Posts: 11,058
Re:The time has come....
Originally Posted by Spenser
God damn us canadians are always getting ripped off, last time I was in there, I had to go to 4 different locations to get the last ones in the city, they told me they were discontinued. thanks for the correction kevin.
02-01-2005, 11:23 AM
#9
0.0 BAR
Join Date: Apr 2004
Posts: 0
Re:The time has come....
Originally Posted by mattssi
1.piping for intercooler
2.some sort of downpipe
3.resistors for injectors
4.couplers or radiator hose with large enough diameter for piping
5.some sort of wastegate
2.some sort of downpipe
3.resistors for injectors
4.couplers or radiator hose with large enough diameter for piping
5.some sort of wastegate
1. crush bends and flex pipe. -all from autozone. probably $35 at most
2. who needs a DP?(tempary)
3. resistors. radio shack. $5
4. couplers, home-depot or lowes. (or stealthmode) they are in the plumbing section at $3 a peice, so you can figure from there. probably 6 or 7 of them, so ~$25 -the 2" ones are about 2.5" so those work perfect. you will still have to "jerry rig" something up to go into your throttle body
5. why not use the internal one? if all else fails, a good spring and some chain! ~$10 (again, temp.) hell you could be boosted this weekend!
I didnt even break the $100 mark
02-01-2005, 11:27 AM
#10
0.5 BAR
Thread Starter
Join Date: Dec 2003
Posts: 191
Re:The time has come....
nice. I just called the local napa here and they have radiator hose with a 2.25 inner dia. But my intercooler is 2.5 so i will have to come up with something. Radio shack does have the resistors. And as far as the wastegate goes, I am not going to be using a chain from a screen door, but will consider it if i cannot find soething else soon. The t3 i got didn't come with the wastegate, but the swing valve assebley was there. My biggest hangup is the downpipe. Not sure what i want to do there. I have a ac/dc 250 amp welder with a high freq attachment(tig) and then a flux welder. I dont have any shielding gas and do not see myself getting anything in the near future. So i am stuck using the chitty flux machine. And i think i will go the ever so impressive open DP for a few weeks.
