tig welding bov flange
 

how much did you guys pay to get your bov flange tig welded to the intercooler pipe? thanks

Re: tig welding bov flange
 

do it yourself.

hmt= home made t.

...if you can't do it yourself or can't find a friend, it shouldn't cost more than 10 bucks

Re: tig welding bov flange
 

i would but i can only mig weld, with tig welding i just make a puddle of crap, i might get a friend too

Re: tig welding bov flange
 

Make friends with someone that welds. Find something that you are good at to trade.

Re: tig welding bov flange
 

If you really don't know anyone that can TIG then you may as well just buy the pipe with flange on it already. If you have to take it into a shop there is no way they'll only charge you $10 as they charge by time and are usually about $70/hr. Nobody is going to take under 1/2hr of work, so best case scenerio is $35 or so. I think flange pipes are cheaper than that.

Re: tig welding bov flange
 

u can make one mig welding as well :y

Re: tig welding bov flange
 

go to a bike shop, typically someone there can weld alum because all the casings are made out of alum.

thats where i learned to tig, at my dads shop, they weld transmission and engines all the time.

Re: tig welding bov flange
 

JB WELD :6

Re: tig welding bov flange
 

:y I 2nd that motion

Re: tig welding bov flange
 

I mig'd mine, works fine.