HomemadeTurbo - DIY Turbo Forum - Tial Style BOV Install

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - Tial Style BOV Install (https://www.homemadeturbo.com/forced-induction-7/tial-style-bov-install-85110/)

liquidgsr

10-19-2007 11:38 AM

Tial Style BOV Install

I bought a TIAL style 50mm BOV off of ebay. It came with two springs but no instructions. I have Tial flange on my charge pipe for the BOV and want to put this on but don't know which one to use. I have a 94 Integra gsr and it came with a tall and short spring. Anyone know which one I should use and any technique on puttin it on?

herman

10-19-2007 12:30 PM

Re: Tial Style BOV Install

use the shorter spring imo.
i got a tial ripoff with the taller spring, this takes more boost to open the valve than the shorter spring.

Eville140

10-19-2007 12:50 PM

Re: Tial Style BOV Install

Same here, mine had the tall spring and stayed close all the time. But mine was super cheap and only came with the one tall spring. I cut about a 1/3rd off it and it works fine now. Sounds better than I thought it would also. http://www.eville140.com/video/15psi.wmv

herman

10-19-2007 01:59 PM

Re: Tial Style BOV Install

Quote:

Originally Posted by Eville140

so i just went and cut about a 1/3rd off the bov spring. its now open on idle, much better, seems to act more like the bailey i had.

All times are GMT -5. The time now is 03:24 AM.