Tial knockoff BOV, trying to kill the rattlesnake effect
Does anyone know how you can kill that ----, its ------- annoying....every time it snaps off it flutters like that, even off like .1psi...stupid knockoff ----
|
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
thats the sound of the chinese snake style kung-fu.
http://www.shaolinchowka.com/shaolin...and/pose/3.jpg |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
[quote=FooK ]
Does anyone know how you can kill that ----, its ------- annoying....every time it snaps off it flutters like that, even off like .1psi...stupid knockoff ---- [/quote wouldnt that be because its so tight? |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
Originally Posted by 93hatchdx
wouldnt that be because its so tight?
|
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
jason,
i think that the tials are adjustable by replacing the spring inside. kinda like their wastegates. http://www.tialsport.com/documents/w3_tial_bov50_sp.pdf |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
thats correct... the tial knockoffs must come with the hard spring - other thing TIALS NEED A DESIGNATED LINE TO THE MANI! NO T's NO SPLITS! ;)
|
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
They dont need no dedicated line ---- that
This may work Im sure for yours as it did for mine I took my RFL apart and added 4 washers to make the spring have a little more pressure on that valve |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
Originally Posted by W O T
They dont need no dedicated line ---- that
This may work Im sure for yours as it did for mine I took my RFL apart and added 4 washers to make the spring have a little more pressure on that valve |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
worked for mine anyways, I liked the sound above 5psi a lot more aswell
|
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
when making my rfl stiffer i.e. more washers. it gave it the rattlesnake effect you speak of. with no washers it was one big woosh compared to blowing off for 3 seconds
|
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
I'm rocking a real tial 50mm and it dosen't flutter I'd go with the others say change the spring...
and whats this ---- about needing a dedicated line?? I have mine off the pcv port with my wastegate and boost gauge and its perfect.... |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
real TiALs have 3 springs to choose from: 7, 9 and 11 psi .
7 psi will be open at idle, and may leak under moderate boost 9 psi is closed at idle, 1 or 2 compressor surge "chigs" 11psi same as 9 but surges like a mother fucker... only really useful under 30+ psi boost. get a tial 9psi bov spring and call it a day phil |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
The fluttering sound is when there's no BOV or when it doesn't open.
CAreful the knock offs are not bad but sometimes the piston doesn't move freely. On a few of them, I had to sand and then polish the piston and the housing where it sits for it to work fine. tqake it apart and try to move the piston in and out by hand. you may find that piston jammed or simply too tight. |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
Originally Posted by BLAAST
The fluttering sound is when there's no BOV or when it doesn't open.
CAreful the knock offs are not bad but sometimes the piston doesn't move freely. On a few of them, I had to sand and then polish the piston and the housing where it sits for it to work fine. tqake it apart and try to move the piston in and out by hand. you may find that piston jammed or simply too tight. the stuck piston sticking is a good idea, ill look into that. |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
ok RFL man... im telling you TIAL recommends a dedicated vacuum source. and im also telling you IT DOES MATTER! we had all sorts of comp surge before giving it a line of its own. this is on a 35psi FP67 2nd gen with a 2.3.
|
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
i got my tial knockoff and the spring was stiffer than ----. my car isnt finished yet but i tested on my other honda and i had to cut 2 coils off the spring for it to open halfway at idle. that's what i want it to do right? im going to be running near 30psi.
|
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
I ended up cutting a couple coils from it and its working alot better, cut em 1 at a time and it kept getting better. I think I need to cut 1 more.
I don't think I'm going to like this blowoff valve, its a quirky nigguh |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
Originally Posted by FooK
it opens, it just isnt opening well.
the stuck piston sticking is a good idea, ill look into that. ---- these stupid fucktards add 4 washers. hahaha ------- idiots. try taking it apart and either lubing the slide with a slight film of grease, or doing what blasst said. chances are its sticking. i havent heard of the knockoff tials having the spring too stiff from the factory like the knockoff greddys |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
Originally Posted by W O T
They dont need no dedicated line ---- that
This may work Im sure for yours as it did for mine I took my RFL apart and added 4 washers to make the spring have a little more pressure on that valve |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
Originally Posted by Turblow
worked for mine anyways, I liked the sound above 5psi a lot more aswell
your mother must have been a meth head. or mentally retarded. |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
haha...fook, yoru a ------ retard. yoru POS BOV isnt opening.
|
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
omfg just get a 3psi wg spring... and use a dedicated line
i wont comment again - bc i really dont care if u ever get this right... |
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
Originally Posted by junkyard racer
haha...fook, yoru a ------ retard. yoru POS BOV isnt opening.
|
Re: Tial knockoff BOV, trying to kill the rattlesnake effect
bwaaahaahaaaaaaaahaaa
well, thats just awful.... |
All times are GMT -5. The time now is 07:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands