Im makin a kit for my crx.Basically need a close estimate for what to buy for mandrels. I was thinking 2 1/4 pipes and 2 1/2 downpipe. How many 180' 90's etc etc

 

I don't know about the crx specifically, but I used 5 u bends for the charge pipes (intercooled) and I'm using one other u-bend plus some leftovers for the dp. Got it all at jcw for under $100 shipped

 

i have tyrus's fmic and a t25 on a zc .. all i use is 3- 180's and 2- 45's from jcw all were 2.5
and for intake side i jsut stuck a cone filter from autozone right to the turbo

i ordered way to many when i did mine


p.s. i also have the battery,ac,ps ,windsheild washer bottle removed

 

i used 1-45°,1-90°, 3-108°, from jcwhitney for 57 shipped with three day shipping. then i went to the auto parts store and bought 2-2ft. sections of straight pipe for like 3 bucks each for a total of about 63 bucks.

 

ali why do you ask these questions when all you have to do is copy the amount i used seeing we both have crx's and basically the same setup.......