HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Thanks Dr.Boost and others 13.7@103 in the teg!!! (https://www.homemadeturbo.com/forced-induction-7/thanks-dr-boost-others-13-7%40103-teg-8042/)

bmxunderground 07-30-2003 01:58 PM

Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
We just got the car dialed in last night and took it right to the track. We have spent lots of time trying to stop some pipes from popping off plus replacing expensive parts that people sold us defective, anyway, we got it done.

our first run as usual one of the charge pipes popped off. We drove the car down the rest of the straight and pulled off to fix it. Justin drove the car over to where I was sitting with my trusty tool box and blanket, unlike all the others around us with expensive trailers and rigs...we had a blanket...yea...anyway, we got the charge pipe on and tight then ran the car a second time and BOOM!!! 13.7@103mph in the quarter mile. I was over joyed inside and there was no one to share it with..Justin didn't even believe the timeslip when they gave it to him at the booth.

Anyway, thanks to all of you who helped us get it going...


13.7 !!!!!!!!!!!!!!!!!!!!!

Todd 07-30-2003 02:04 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
Congrats.. try putting a self tapper screw in the charge pipe.. put one on opposite side from the other so there is two total.. then grind off the inside part.. That will make something for the clamp to grab hold off.

fastcivicboy 07-30-2003 02:29 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
wuts ur setup? and nice job man!

leed 07-30-2003 02:45 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
Congrats on a 13.7!!
So yeah, whats the setup...pics...

RENR 07-30-2003 02:59 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
nice! ;D

nyc86zc 07-30-2003 04:47 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
Good run man.

Another thing that you can do to keep the charge pipes from falling off is you can put small "dot" welds on the ends of the charge pipes and IC.
Then the clamps have something to grip.

Dr.Boost 07-30-2003 04:50 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
Cool. Nice run.

How much boost are you running for the pipe to pop off like that? Is it at a funny angle or something?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

J-SMITH69 07-30-2003 05:07 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
if the pipes are real smooth... where the rubber connector thing is... try and scratch them up with sandpaper or somethin... gives the rubber something to grab

bmxunderground 08-01-2003 08:36 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
We ran 13.7 @103mph and only 5psi of boost. Thanks to this site we were able to do it. Matching compressor maps, maximzing exhaust flow, fuel mixture, oil pressure control...etc...its all here.

I have posted tons of pictures on here of it but here comes some more. If you want to see them all including the build up, just check out the raw link. http://www.s-icon.com/images


I will be uploading some more in the next few hours if you just want to keep clicking...

when they are all on I will come back and edit the post and add them in...

Thanks again guys...DR.BOOST!!!!

PS: if any of you live in near or around Nashville, TN. come join us at the bellvue shopping center Saturday evening (2nd) for some late evening fun...call me if you can drive up but email me for the ph#

Eric

nyc86zc 08-01-2003 09:24 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
Car looks sweet man.
Geesh, you have enough pictures to do a complete writeup.
I know it's not yours, but Why? ???
http://www.s-icon.com/images/site/s-10eclipse.JPG

GUIL 08-01-2003 09:28 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
Nice set up

J-SMITH69 08-01-2003 10:26 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
whats the trim on that turbocharger. i have a .48 hot / .42 cold. non vtec engine. so only 6500rpm

ZexRex 08-02-2003 12:31 AM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
hey im kinda close to nashville, i will have to come down sometime after my car is put together. you dont want me to bring my beastly truck haha

bmxunderground 08-02-2003 11:20 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
.50 trim....very good size for anyone. T304e. 2.5inch exhaust custom flange back.

I will submit a writeup to this site soon, I have MANY more pics to add to that link...

Thanks, Eric

PS: that truck pic is in the "quote of the month" section on our Saturn site. The quote with the picture is. "When we said Import meets Domestic, this is not what we meant"

We were really talking about our Saturn.....um...yea..for those of you who may not know.
http://www.s-icon.com/images/nopisaturn3.jpg

thermal 08-03-2003 07:05 AM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
WOW! 13.7 on 5 psi boost?1 Amazing work!

tj_tegy 08-05-2003 02:37 PM

Re:Thanks Dr.Boost and others 13.7@103 in the teg!!!
 
nice work man!!, whats your setup?


All times are GMT -5. The time now is 09:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands