i got 2 turbo to choose for my set up a te04h and a IHI witch turbo is better for 10 psi on a D16Z6 and witch is easyer to do the down pipe thank

 

wrong place to post. try forced induction.

 

WTF this is not a force induction fourm ?

 

probably a te04h... i think its a little bigger

 

Isn't it a TD04-H?

either way, if that's the same turbo from the greddy kit, that's what you want.

Matt

 

the TEO4H is off like a lebaron and along with lots of other cars, yet its made by mistu also.. but the TEO4H would be your best bet for 10 psi.. i've heard its .42/.48... i have those 2 turbos also but i went with IHI.. its totally up to you.

 

HOW IS THE IHI WORK FOR YOU I DON'T KNOW IF THE TEO4H HAVE THAT BIG OF A A/R HOPE SO HOW HARD IT IS TO MAKE A DOWN PIPE FOR IT ?

 

i have the teo4h, out of a lebaron but have not installed it yet. to see my downpipe so far click on this link.
http://www.villagephotos.com/pubbrow...elected=823546
i made the flange and welded the pipe and a little angle piece for the flapper onto it. my dp will be going almost straight for about 6 inches and then bend underneath the oilpan.