tapping the oil pan?
 

what did everyone use to tap their oil pan?

just curious as to the fastest way to get it done, so i can drive it the same day

its a little to cold to be riding the bike around now.

Re:tapping the oil pan?
 

i used a drill bit...and a brass fitting i threaded in there

Re:tapping the oil pan?
 

i meant to seal the fitting in there.

Re:tapping the oil pan?
 

lol...just drill the right size hole and thread it in there (use a little teflon tape if you want i guess)...the fitting is never submersed so it doesnt really need to be sealed like crazy imo

Re:tapping the oil pan?
 

yeah, that's probly what i'll do, thanks

Re:tapping the oil pan?
 

a little jb weld never hurt, but i never had a problem with mine without it

Re:tapping the oil pan?
 

drill a hole about the same size as the fitting screw that bitch in there and seal it up with jb weld works perfect and its so easy.

Re:tapping the oil pan?
 

I used a 1/2 conduit knock out and welded a piece of drain pipe in from the Saab return line I had.

Re:tapping the oil pan?
 

Drill bit and stealth mode feed/return kit...came with what I needed...I also brazened the fitting with a torch and some silver sodder around the edges...teflon tape was used and the stuff provided from stealth(obviously)

Re:tapping the oil pan?
 

That's what I did too.