Hello i was wondering if i could use the stock DSM o2 housing on my EF civic?? I was wondering if it hit the crossmember, or if anyone has tried to do it?? The reason is because i want to be able to make an easy downpipe!!!!!!

 

Bump need to know!

 

Plan on removing the front mount?

 

NO, i guess ill just get a t25 exhaust flange and get a custompipe built!!

 

Pretty much your option. Just buy a bunch of mandrel bent pipes and jig that bitch together. Don't forget, you don't need anything above 2.5 inches (maybe even less).

 

you a ------- moron, get 3 inch for the dp, orwhatever size you want, I say 3 inch, or just go open DP. 2.5 would be a good choice too.

Checkthe main page to see if the DSM o2 housing fits, if nobody uses it, chances are it dont' fit. try moking it up to see for yourself, if you need to cut the front crossmember, I say go ahead, alot of guys do.

 

I dont have one to mock up! so i wont be doing that, i only plan on using 2.5 inch piping for the DP. Since i only got a 2 3/8 exhaust! ahhah

 

Your a ------ moron, who in this ------- world does a write up "My trip to the dump"

2.5in downpipe is perfect for little HMT kits. The stock DSM o2 housing will fit, and clear the front mount. Its the cross member that is in the way, you have to notch out about 2in's of it in order for it to clear. So I would recommend just getting a custom o2 housing made, or a custom front cross member so it can clear.

Jeff