Switching Projects...
 

Hey guys i was intending on boosting my 90 hatch w/ B16, but as luck would have it i found a 93 SI Hatch(favorite body style) So im selling my old hatchie and boosting my new hatchie with the Z6.

So my questions are:
- Will my Ebay Super 60 from down2turbo guy be too much?
- I still plan on running the hack w/ 450's, that ok?
- How much would it be to get uberdata to were i could plug a laptop into my ECU?
- Whats a good Mani for the motor to keep AC?
- Can you mount the 30"X6" JRC FMIC without the AC lines getting in the way?

I think thats about it. Thanx alot guys...

J

Re:Switching Projects...
 

I'll to my best.

*The turbo should be fine it all depends on how much boost your gonna run.

*Again the hack will work as long as you keep the boost relitivly low (8-10psi)

*I'd give up on A/C. The lines easily could be in the way. And the compressor will generaly be a PITA to work around.

Re:Switching Projects...
 

i bought th egay super 60 from him and it pulls like a ------ ox with his balls in a neuce... this on my built mini me

Re:Switching Projects...
 

If I were you...I would swap the motors...put the B16 in the EG and put the Z6 in the EF

Re:Switching Projects...
 

i think the greddy manifold and 14b allow u to keep the a/c

Re:Switching Projects...
 

Uberdata is cheaper than the hack, no hack is good hack. Chipping your ECU and getting someone to burn you a basemap (which would run better than the hack) would cost $30. Life is good.