HomemadeTurbo - DIY Turbo Forum - stupid intercooler piping.

Page 2 of 2

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - stupid intercooler piping. (https://www.homemadeturbo.com/forced-induction-7/stupid-intercooler-piping-47060/)

TurbodEG

09-30-2005 03:39 PM

Re: stupid intercooler piping.

haha cool. well to the store i go

MikeJ-2009

09-30-2005 05:04 PM

Re: stupid intercooler piping.

And if hairspray doesn't do it, go to home depot and pick up some 3M Super 90 spray adhesive. It's in the paint department and I doubt you'd even need clamps anymore. O0

d0nfry

09-30-2005 05:33 PM

Re: stupid intercooler piping.

Quote:

Originally Posted by TurbodEG

on my d15b7 everything stock. no managment. stock injectors. pushing 8 psi the intercooler pipin keeps blowin off. no matter how much i tighten the clamps(t-blot) they won't hold. any advice on how to fix the problem besides welding them?

i'm just curious, your not running any management not even fmu?

samson

09-30-2005 05:51 PM

Re: stupid intercooler piping.

Hairspray works. Well, on bicycle handlebars it does atleast. Goes on easy then stays on tight. ;) ;D I see alot of people blow chargepiping. I have yet too. God bless, I guess.

JP

thiggyperformance

09-30-2005 07:00 PM

Re: stupid intercooler piping.

the best solution besides welding is to take it to a metal fab shop and get them to roll a bead if they want too much get your own roller http://www.eastwoodco.com/shopping/p...1&keyword=bead

jdm monkey

09-30-2005 09:36 PM

Re: stupid intercooler piping.

Quote:

Originally Posted by 70Challenger

Quote:

Originally Posted by SloS13

hair spray. Spray some in the coupler and some on the pipe. put the coupler on the pipe, clamp down. wait 30 minutes and then test 'er out.

Some of the most effective solutions are always some of the weirdest... but the weirder the better. I had a dvd that wouldnt play and my buddy told me to use toothpaste on it, sure enough it worked... musta been the added tarter control

anyway, if toothpaste can fix a dvd, then hair spray will take care of your ic pipe!!

yah, the flouride fixes the relatively deep scratches even on dvd, glasses etc
I'm not sure if hair spray will hold under heat, pressure and vibration under the hood... get that thing bead rolled!!!
hair spray may work

Toysrme

10-01-2005 01:11 AM

Re: stupid intercooler piping.

Automotive goop.
Very, very tacky. Works very good on TB/Carbs & IC's. Not always so good on the compressor. If the compressor tends to get very hot, the goop won't always hold.

All times are GMT -5. The time now is 11:46 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page