stock GSR pistons
I have a question about boosting my GSR, is the stock compression okay for boost only about 8-9 psi. I'm just not sure if I should get lower CR pistons to safely boost?
|
Re: stock GSR pistons
Millions of people have done it!!! Just do a compression test and boost that bitch!!! It's all in the tune....
|
Re: stock GSR pistons
Which turbo's are best for only about 250-275whp on a B18C1, I think a T3/T4 is a bit too big. Any smaller that still use the t3/t4 style flange for the DP?
|
Re: stock GSR pistons
People use anything from a small t3 to a holset.. Depending on the person..
|
Re: stock GSR pistons
Go .57 trim T3/T04E with .63 AR stage 3 turbine.
|
Re: stock GSR pistons
Thats the turbo im runningas of now... Just watch what turbo you buy. theres alot of fakes and poorly made turbos out there..
|
Re: stock GSR pistons
Originally Posted by Joseph Davis
Go .50 trim T3/T04E with .63 AR stage 3 turbine.
|
Re: stock GSR pistons
I want something that's internally wastegated.
|
Re: stock GSR pistons
You can get internal wastegate adapters for the Ford style housings used on the "aftermarket" Garretts from Fords.
|
Re: stock GSR pistons
I ran a .57 trim T3/To4E with .48 AR stage 2 turbine on a B18B1 and LOVED it. Spooled super quick and i never had a problem with it dying out up high. I really liked the midrange powerband and part throttle boost.
|
Re: stock GSR pistons
https://i13.ebayimg.com/02/i/04/e2/33/6c_1_b.JPG
They come off Saabs and Volvo T3 turbos typically. The ones on SVO's have a cast elbow. |
Re: stock GSR pistons
Originally Posted by Inquisition
https://i13.ebayimg.com/02/i/04/e2/33/6c_1_b.JPG
They come off Saabs and Volvo T3 turbos typically. The ones on SVO's have a cast elbow. |
Re: stock GSR pistons
Before I start ordering things I wanna do a bit more reasearch and ask a couple more questions.
I've been looking at the TDO5H 16G from the EvoIII. My questions is where do I find manifolds with that flange on it to bolt to a b18, also the DP? Anyone have any links I can check out? |
Re: stock GSR pistons
|
Re: stock GSR pistons
Originally Posted by chrispittman
Before I start ordering things I wanna do a bit more reasearch and ask a couple more questions.
I've been looking at the TDO5H 16G from the EvoIII. My questions is where do I find manifolds with that flange on it to bolt to a b18, also the DP? Anyone have any links I can check out? |
Re: stock GSR pistons
Man if this is your first time turboing something you better look around on here at everyone else's builds. And do ALOT of reading...... look at some of the turbo projects
|
Re: stock GSR pistons
Originally Posted by Inquisition
https://i13.ebayimg.com/02/i/04/e2/33/6c_1_b.JPG
They come off Saabs and Volvo T3 turbos typically. The ones on SVO's have a cast elbow. that wont fit a svo turbo |
Re: stock GSR pistons
Originally Posted by bitchasscracker
that wont fit a svo turbo |
Re: stock GSR pistons
I had an XR4ti turbo which IS an SVO turbo and it had that wastegate design. The Volvo one is slightly different.
|
All times are GMT -5. The time now is 06:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands