stealthmode oil line kit
 

i saw on the site, that it said that they stopped making the kit for the 14b, what is the reason for this? i plan to do a home made setup on my d15b7 and wanted to use a 14b, what should i do for oil lines?

thanks

Eric

Re:stealthmode oil line kit
 

anyone?

Re:stealthmode oil line kit
 

PM Stealthmode and ask him than tell him what a piece of ---- he is for not making a kit for a 14b ;)

Re:stealthmode oil line kit
 

I'm not sure where you read that, but it's false. I have the 14b kit, the 17c kit, and the new 26z kit if anyone wants them. 8)

Re:stealthmode oil line kit
 

ok sorry i may have mis-read that, i apologize for the false info, thanks i will contact you when i finally track down a 14b for resonable

eric

Re:stealthmode oil line kit
 

Whilst we're on the subject..

I just got my T3 Stealthmode kit delivered, and it seems to be missing a nut to secure the oil return fitting to the sump. I'm going to get one from a local hardware store, but can someone let me know if all kits don't have one, or was I just unlucky?

Thanks,

Re:stealthmode oil line kit
 

If you are talking about the drain flange bolts on the 14b kit, than you are correct.
Craig found 3 variations on the thread size for the drain flnage bolts of 14b's, so instead of sending out the one size we stock (that fit all t3's and t25's) the decision was made to not include them at all. It's all in the fine print, but that's the story about it.

It basically comes down to less "where's the bolts" emails than "hey, these bolts don't fit right". -Steve

Re:stealthmode oil line kit
 

I think he's talking about the fitting that goes into the oil pan?


You're a ------- crazy ass if you really want to put a nut on the inside of your oil pan. I wouldn't be able to sleep at night knowing there was a nut on the end of my drain fitting.

I always drill the hole just barely big enough for the fitting to screw into the pan. Before it's all the way tight I apply JB weld and then finish tightening it. Then I apply another layer of JB weld all around the fitting. The only thing on the inside of the pan is the end of the fitting with no JB weld and no nut.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:stealthmode oil line kit
 

^ why if you tighten the nut enough it won't come off.

Re:stealthmode oil line kit
 

Yeah, bolts never come untightened, especially brass nuts inside a motor spinning 7000rpm. :P That's unheard of. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:stealthmode oil line kit
 

Actually thats my big complaint about the Stealthcunt oil line kit. When I got it I was suprised that there was no nut to weld to the oil pan so I ended up not using his return line.

Re:stealthmode oil line kit
 

Lisa Turtle didn't like the kit either.

Re:stealthmode oil line kit
 

??? I like the turbo drain fitting, feed line and block fitting just not the 10an return and the way to attach it to the oil pan.

Re:stealthmode oil line kit
 

Than go buy yourself some fancy AN fittings, yuppy. :D

Re:stealthmode oil line kit
 

Maybe you should offer them in a "baller oil line" package you bastard ;)

Re:stealthmode oil line kit
 

I already did. The people said they don't want to pay for them, they are harder to put together, and they aren't neccessary.

I only give the people what they want. ;)



Oh lord, where's a moderator when you need one? ::)

Re:stealthmode oil line kit
 

Than offer a nut option so I can at least weld something to the oil pan. Also, your a scammer :P

Re:stealthmode oil line kit
 

Bingo :D - I would have said oil pan, but I forget that you guys have different names for some car parts :P

Another job for JB weld then..

Re:stealthmode oil line kit
 

I put jb weld on the inside of the pan also. Do you guys think it will be ok? -nick

Re:stealthmode oil line kit
 

another guy i know did the same thing, i believe his is still together, though he cant keep a motor together long enough so i dunno lol

Re:stealthmode oil line kit
 

If you mix the jb weld good and apply it so it isn't thin anywhere, I can't see why you'd have a problem.


No. ;)

Re:stealthmode oil line kit
 

Your a scammer and you have herpes :P

Re:stealthmode oil line kit
 

yo its not hard 2 go 2 home depot and get the ---- u need. damn u act like he advertised for the oil line and sent u a drinking straw. just get over that ----. your a scammer and u have herpes. what are u like 6 arguing like a bitch.

Re:stealthmode oil line kit
 

I plan on using JB weld. I think just about everyone i know who is using the stealthmode kit attaches the return with some JB weld. jb weld is the ----. just make sure you give it time to dry. -let it sit overnight and dont ---- with it. just let it do its thing and dry. ;)

Re:stealthmode oil line kit
 

He does argue like a little bitch, but with Whitey being like a long lost brother (with black parents) he's just ------ around. ;)

Re:stealthmode oil line kit
 

Haha, noobie bagging on Whitey. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:stealthmode oil line kit
 

Put my car on the lift today and saw the jbweld on my pan had cracked, WTF! Tossed some quick-dry JB on there, problem solved. Another quart of oil saved by jb. 8)

Re:stealthmode oil line kit
 

Lol, shut your cocksucker noob and keep your 2 cents to yourself. I have nothing against Stealthmode and I've always reccomended his stuff to everyone so stay out of this "arguement" ::)