Stealthmode IC kits
I'm looking to move on from the pvc piping i have right now. I saw that stealth has a charge piping kit that is really cheap. On a setup using a fmic, and the turbo outlet facing up, what else besides the couplers will i need?
http://---------------------------/pipes.htm |
Re: Stealthmode IC kits
probly a 180 and clamps
|
Re: Stealthmode IC kits
alright.. so will i just end up cutting the 180's in half and using them as 90's?
|
Re: Stealthmode IC kits
any picture of your current set up?
|
Re: Stealthmode IC kits
ummm that piping wouldnt have even come close to working on my crx...but hey whatever O0
|
Re: Stealthmode IC kits
http://norcalhockey.org/Small/new/Engine%201.jpg
As you can see (the pvc is black), it comes up out of the turbo, and over to the hole. from there it goes down and over with 2 90 deg. bends into the intercooler. From there it's out the intercooler, 2 90's and up through the spot behind the headlights, and you can see the rest. |
Re: Stealthmode IC kits
just get a spare u bend 180.... you pretty have it covered, clamps, couplers and just a suggestion, get special clamps... that are a dollar each and they can be torqued to like 80 ftlbs, aslo get as much pipe into the coupler as possible and tighten with a ratchet, not a screw driver
mike |
Re: Stealthmode IC kits
Do I spy a single wiper? ;)
I like how the valve cover matches the rest of the car though. |
Re: Stealthmode IC kits
ya.. neither of those was me... i'm looking to get a new - black - crx in the near future.. too much rice on this one.
|
Re: Stealthmode IC kits
The piping kit was designed as best as possible to give you more than enough bends. If you happened to need an extra bend after you ordered you can email me. I don't leave people hangin. :)
|
All times are GMT -5. The time now is 11:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands