HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   SR20DE??? (https://www.homemadeturbo.com/forced-induction-7/sr20de-79466/)

bacnoonoi 06-25-2007 03:32 PM

SR20DE???
 
I have an sr20de the non turbo one, we got it for free and its in good condition about 87*** miles. i was going to help my friend do a hmt kit for it. has anyone on here done it ? results, cost, what all do you need???? please help we have a s13 shell with a slow sohc haha

stillnoturbo 06-25-2007 09:29 PM

Re: SR20DE???
 
It's pretty damn easy to boost the DE. Everything from the FWD DET bolts on. Compression isn't too high.

greenbomber 06-25-2007 09:58 PM

Re: SR20DE???
 
is the sr20 going into the s13? is it rwd or a fwd sr20? IF it came out of a sentra you're sol

bacnoonoi 06-29-2007 08:16 PM

Re: SR20DE???
 
yea rwd. what do you mean "sol"? we already have the stock sr20 manifold and t28 turbo. were ordering eagle rods soon. what ecu can we use? most likely im guessing we gotta use the sr20 tranny haha us if anyone has done this help us out thanks

Slo_crx1 06-30-2007 01:45 AM

Re: SR20DE???
 

Originally Posted by bacnoonoi
yea rwd. what do you mean "sol"? we already have the stock sr20 manifold and t28 turbo. were ordering eagle rods soon. what ecu can we use? most likely im guessing we gotta use the sr20 tranny haha us if anyone has done this help us out thanks

What he means is if it's a fwd sr20de from something like an older sentra ser, it has a different bolt pattern that bolts to a fwd tranny. As far as I know there is no way to bolt them to a rwd tranny unless it came from a rwd car.

stillnoturbo 06-30-2007 12:21 PM

Re: SR20DE???
 
Sorry I must been out of it not to too the S13 part. lol. Just get the DET ecu and MAF and injectors.

turboDA6 06-30-2007 02:08 PM

Re: SR20DE???
 
if ur gonna use the det ecu, you need maf, ignitor, sr20det harness, crank angle sensor, and coil packs.

jus get a stock sr20det cast manifold, stock or aftermarket elbow n downpipe. use the stock sidemount or get an ebay fmic kit. there cheap as ----.you can even boost the stock sr20de motor cuz it has a lil higher compression then stock sr20det so it has better low end torque and can still handle boost.

if the sr20de is out of a fwd, it aint happening.

greenbomber 06-30-2007 05:11 PM

Re: SR20DE???
 
It's possible to use the KA Ecu, with euther Bikirom or a Calum. There has been alot of stuff into the Calum ECU with real time and all that ----. but its not cheap.

bacnoonoi 07-01-2007 05:22 PM

Re: SR20DE???
 
---- it is out of a fwd so does that mean we cant get a rwd trannie off a sr20det bc we found one for 300. it wont bolt up? we got the turbo all mounted up we used the same sr20det set up side mount, mani, injecotrs

greenbomber 07-01-2007 07:40 PM

Re: SR20DE???
 
FWD will not fit, sorry


All times are GMT -5. The time now is 03:11 PM.


© 2024 MH Sub I, LLC dba Internet Brands