Spec V, first build, about $1000
0.0 BAR
Joined: Feb 2005
Posts: 0
Re: Spec V, first build, about $1000
Originally Posted by c0mpl3x
more magical than your lack of hmt tshirt designs
Thread Starter
0.5 BAR
Joined: Dec 2006
Posts: 141
Re: Spec V, first build, about $1000
Originally Posted by fe3tcourier
if its not built to handle a proper raping, then its not built right. thrashing it hard is a non issue if you have done your job right. the only question is whether to bother taking and posting vids for a web audience that will forget you soon enough. personally, i like it. but saying that its doing the car harm is not at all right.
are those engines DI ?
fred.
I'm not worried about hurting the car/motor/tranny, I'm worried about the poor ol' stock clutch disk and disabling my DD. If I had a little more tire spin it would "cushin" the clutch disk. If the suspension was still stock I'd probably spin 3rd more than it does (before the suspension was dialed in), but with 225 tires and the suspension setup hooking like it does, I'd hate to have to drop the tranny and just replace the disk and not the flywheel, pressure plate, ect. So it's not that I'm a pansy or I don't think it won't take the abuse (it's taken plenty and if the rain holds off I've got some runs tonight), I've just got more than enough on the line to persuade me from beating it to within an inch of it's life for some (not you, you like the car) people who will insist on ragging on my ----.
1.5 BAR
Joined: Jul 2007
Posts: 752
Re: Spec V, first build, about $1000
direct injection is what i meant. fair enough, didnt realise that it had a stock clutch. i'd not turbo without a serious clutch. hell, i went to the extreme of fitting a larger stock clutch into my small bell housing to give it more heat resistance when it does get to do a bit of loaded slipping. still, i guess there is headroom provided that you keep the heat out of it.
that video isnt insane, but it is decent :-)
so gutted that i couldnt make a better vid before leaving new zealand. i have to wait TWO YEARS to see all that hard work again...
fred.
that video isnt insane, but it is decent :-)
so gutted that i couldnt make a better vid before leaving new zealand. i have to wait TWO YEARS to see all that hard work again...
fred.
Thread Starter
0.5 BAR
Joined: Dec 2006
Posts: 141
Re: Spec V, first build, about $1000
Originally Posted by Joseph Davis
Holy ----! A guy who wasn't man enough to leave the turbo bolted to his 22R for longer than 50 miles has just entered the thread! The ---- talking will reach a new pinnacle!!
0.0 BAR
Joined: Jul 2006
Posts: 0
Re: Spec V, first build, about $1000
Um I hate to be the first to say it but if you consider retarted wheel spin a small chirp into 2nd then Ok but to me it looked like an NA sentra dude. My boys Spec V has Nismo Header Tanabe Catback and CAI and it sounds like his would keep up.
3.0 BAR
Joined: Apr 2005
Posts: 6,036
Re: Spec V, first build, about $1000
get times, 6 psi is better but you still have a 14 second car i bet, none the less thats pretty good they run like a 15.5 stock or a little slower right ?? and jd just becouse i dont own a turbo car right now doesnt mean i dont know how to install a turbo kit 
