HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Simple Question (https://www.homemadeturbo.com/forced-induction-7/simple-question-11987/)

greddycrx 11-15-2003 12:58 PM

Simple Question
 
With cold air intakes, you usually have a bypass valve so that water wont get sucked up into your engine. So, when you turbo your ride.......what if it starts raining cats and dogs while your driving.......water will most likely get sucked into the turbo, right?? well, is this bad or not?? will it ruin the turbo? i know most daily drivers will encounter this so what happens? is it bad or it doesnt mess up anything??

surfer 11-15-2003 01:23 PM

Re:Simple Question
 
i've never seen a bypass valve on an induction kit, have you seen one? where is it? what does it look like? Anyway a little water wont do the turo any harm it'll ---- the engine first, but dont put the filter somewhere where its gonna suck up puddles or your car wont like you for it

shortyz 11-15-2003 01:30 PM

Re:Simple Question
 
how the ---- would u get water in your turbo?

water doesnt come up there unless u drive into a huge puddle and stop...

also if you got a decent filter itll catch most of the water (k&n).

u dont want water hitting your turbo fins. itll eat the blades.. imagine something turning at 100k rpm and it hit water droplets? hello pitting. just dont use a screen..

smokey_civic 11-15-2003 02:12 PM

Re:Simple Question
 

Originally Posted by surfer
i've never seen a bypass valve on an induction kit, have you seen one? where is it? what does it look like? Anyway a little water wont do the turo any harm it'll ---- the engine first, but dont put the filter somewhere where its gonna suck up puddles or your car wont like you for it

What the ---- are you trying to say? Shortyz is right, the propellers + water = fucked .... and it would be pretty hard for water to get into the turbo .... A bypass valve usually connects the 2-piece CAI .... it's like foam basically, just catches water. - Matt

projekteg 11-15-2003 02:16 PM

Re:Simple Question
 
if you're referring to hydrolocking the engine, i'v only seen this from cold air intakes that sit so low to the ground. i'v your turbo inlet is under the hood, unless you spray a hose in your engine bay while the car is running, you'll be aight ;)

Dr.Boost 11-15-2003 02:49 PM

Re:Simple Question
 
I thought a bypass valve was a secondary airway that allows air to flow through if the primary gets plugged(water). It could work with a turbo. You could use two of them even. One before the turbo on the intake side and one in the charge pipes before the throttle body. Then your turbo and your motor would be protected as long as you don't drive across a lake or something.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

smokey_civic 11-15-2003 06:11 PM

Re:Simple Question
 
Bypass valve bitches!!

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2442401190


d16tuner 11-15-2003 06:17 PM

Re:Simple Question
 
The bypass valve doesn't "catch" the water, it simply allows air in once the resistance at the filter is great enough. It is harder to suck water up the tube than air, and once resistance goes up, the bypass opens allowing air to flow the path of least resistance. By the time water reached the filter on a normal turbo setup it is gonna probably be at the bypass valve too so there really is no point. The only way I would do this is if I had my filter sitting really low with the piping running vertical and the filter being at the bottom instead of running it horizontally from the turbo to the filter., and why would you want to do that? It'd be easier to just move the filter!

smokey_civic 11-15-2003 06:21 PM

Re:Simple Question
 
Yes, so I was wrong, big deal. ;) - Matt

surfer 11-16-2003 07:04 AM

Re:Simple Question
 
I wasnt saying it would be ok to try an use the turbo as a water pump, surely little drops of water wouldnt do it too much harm would they?


All times are GMT -5. The time now is 12:01 AM.


© 2024 MH Sub I, LLC dba Internet Brands