HomemadeTurbo - DIY Turbo Forum - Side mount-piping questions

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - Side mount-piping questions (https://www.homemadeturbo.com/forced-induction-7/side-mount-piping-questions-49746/)

kwelitymuzik

11-09-2005 04:17 PM

Side mount-piping questions

I have a sidemount from a 300zx I want to put it on my 97 civic, I just need to know the average price of piping and how much pipe will I need becuase I think i'm gonna go to homedepot buy it and then have someone bend it for me, thanks also feel free to drop uropinong

robs99si

11-09-2005 05:28 PM

Re: Side mount-piping questions

you're gonna have to estimate how much piping you'll need on your own by measuring and looking at where the ic,turbo,engine will be.

hotrex

11-09-2005 05:41 PM

Re: Side mount-piping questions

a safe bet for charge piping, from my experience, would be 4 180 bends, a 45 bend off the tb, and abut 4-5 feet of straight section to be safe.

most cooler piping kits end up using 6 clamps.

turboDA6

11-09-2005 06:16 PM

Re: Side mount-piping questions

Quote:

Originally Posted by hotrex

a safe bet for charge piping, from my experience, would be 4 180 bends, a 45 bend off the tb, and abut 4-5 feet of straight section to be safe.

most cooler piping kits end up using 6 clamps.

you mean 6 couplers? which would equal 12 clamps. even the coolest kits have atleast 8 clamps

i used only 5 u bends n got all my fmic piping done.

Kevinlwhite

11-10-2005 11:08 AM

Re: Side mount-piping questions

Im running a side mount of a talon on my 93 hatch and all my pipe, bends and all was roughly about 5 ft in lenght

All times are GMT -5. The time now is 08:23 AM.