HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   should i retard? (https://www.homemadeturbo.com/forced-induction-7/should-i-retard-7148/)

2DXtreme 07-08-2003 01:38 AM

should i retard?
 
i have a 99 civic dx d16y7 running 5lbs of boost with safc hack. should i retard my timing at all and if so how much.

scttydb411 07-08-2003 10:10 PM

Re:should i retard?
 
you could probably get away w/o, but i'm retarding 1/3 degree per pound of boost. using the btm gives extra margin of error incase i get bad gas etc.

Dr.Boost 07-08-2003 10:12 PM

Re:should i retard?
 
Can you here detonation? At 5 psi with the AFC hack your timing is super advanced. I would suggest retarding it.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

2DXtreme 07-08-2003 10:27 PM

Re:should i retard?
 
i don't hear any detonation although i've only pushed it a couple of times and i didn't push it for long. I don't have a btm or anything like that. Is there a way that i can retard it from the distributor and if so how much.

Dr.Boost 07-08-2003 10:33 PM

Re:should i retard?
 
You can retard it at the distributor by turning the distributor counter clockwise to advance, clockwise to retard. First you have to jump the connector under the dash above the ecu. I would retard it 2-4 degrees.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

scttydb411 07-09-2003 08:12 PM

Re:should i retard?
 
at 6psi tuned my a/f was still on the rich end and didn't have detonation. i turned it up to 8psi still ok. at 1/3 degree per psi makes me 2.5 degree retard at 8psi. if there was detonation, figure i'd know especially during/after dyno tuning. i don't know?..??


All times are GMT -5. The time now is 01:06 AM.


© 2024 MH Sub I, LLC dba Internet Brands