sc61 or hy35
just kinda curious which people would perfer it's going on an ls with:
70mm sk2 tb sk2 manifold p&p head delta cams sk2 valve springs and tit retainers stock bottom end just curious cuz I can get both for the same price but what would be more benifitial. I kinda need help now. |
Re: sc61 or hy35
holset can be had cheaper and will spool slightly quicker on an ls
|
Re: sc61 or hy35
peronal prefrence, i like both :y ;)
|
Re: sc61 or hy35
yeah I was thinkin the holset but with never having used either I figured I would ask
|
Re: sc61 or hy35
Off topic but how much are the skunk2 springs/retainers? The hy35 is a good turbo for a LS :y
|
Re: sc61 or hy35
sc61 are pricey but baller
|
Re: sc61 or hy35
to compare with sc61 or hy35, you could use a garrett 60-1.
changing turbine a/r and trim to maximise it's behvaior will be much easier and cheaper. |
Re: sc61 or hy35
sc61 because I never used a holset turbo, but I am currently using a sc61.
|
Re: sc61 or hy35
sk2 springs and tit retainers cost me $350. this is good what about the hx35? This is pretty much what left I need so I wanna see what the best option is before I buy
|
Re: sc61 or hy35
stock honda springs for that much? man you would have been better off with some aftermarket springs.
get wahtever turbo you can afford, my pick is the sc61 for performance, I love this turbo |
Re: sc61 or hy35
sk2 = skunk2 genious I can get which ever one I want to know what wouold be more practicle as for I have never used any other them and have no personal preferance
|
Re: sc61 or hy35
I was planing on the sc61 I origanally purchased one but already sold it for a nice profit. but I hear the hy35 has a btter spool time
|
Re: sc61 or hy35
I am using skunk 2 cams.
but when you say s2k, honda s2000 come to mind. I have a lot of friends that are paying that much for stock itr and s2000 springs and retainer just because the s2000 can rev high, and because it say jdm. so my bad I just misunderstood your acronym. skunk 2 is not as bad as what people make them out to be. I like the cams, really vicious cams |
Re: sc61 or hy35
I'm gonna run the delta cams for now I night either go crower or have some custom built. Delta can do that to.
|
Re: sc61 or hy35
a buddy of mine put a holset hy35 on his ls, its a pretty good turbo for a LS. havent come close to pushing it yet 7psi max so far.
spools good too on a stock motor with regrind cams 4" DP transitioning to 3" (holset has a 4" turbine exit) a ram horn and a fairly restricitve exhaust |
Re: sc61 or hy35
Originally Posted by jdmhatchracer94
sk2 springs and tit retainers cost me $350. this is good what about the hx35? This is pretty much what left I need so I wanna see what the best option is before I buy
HX has a slpit exahust flange,and there bigger i think too what year is the turbo from, i know the newer ones have an electronic WG actuator |
All times are GMT -5. The time now is 02:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands