Same or not the same?
 

Garrett Airesearch
Model: T3/T04B (125-300 HP)
Compressor A/R: 0.60
Compressor 48 trim "S"
Turbine A/R: 0.48
Turbine trim: Stage 1
Flanges: T3 inlet,


Brand: Turbonetics / Garrett
Model: T3 (.48/.60)
Size: T3/T03
Compressor A/R: 0.60
Compressor trim: "60"
Turbine A/R: 0.48
Turbine trim: standard

What exactly is the difference between the T3/T04B and the T3/T03? They have the same .48/.60.

Someone help a homey out.

Re: Same or not the same?
 

trim size

Re: Same or not the same?
 

Yes and no...trim size has a little bit, but it has a t4 (although tiny) compressor housing yielding a slightly different map...http://www.graphics.cornell.edu/~v/c...maps/t3-60.gif
standard t3-60 trim...
http://www.graphics.cornell.edu/~v/c...ps/t04b-s3.gif This is the closest to4b s-trim I could find, so I'm not sure if it's correct.

I have a feeling though if the standard t3 you're trying to compare has a .48 a/r exhaust housing (more than likely a t-bird or merkur t3) then it's only a t3 50 trim at most...pictured here...http://www.graphics.cornell.edu/~v/c...maps/t3-50.gif
Hope these help some.