rx7 injectors
do mazda #195500-1350 fit in to my dohc zc fuel rails. i need two more if they will fit
|
Re: rx7 injectors
same mods needed as dsms do
|
Re: rx7 injectors
becareful. some are peak hold and some are saturated
|
Re: rx7 injectors
They are notorious for 'leaking' with age. FYI.
|
Re: rx7 injectors
Originally Posted by Hitchhikkr
They are notorious for 'leaking' with age. FYI.
|
Re: rx7 injectors
i just brough a set of those for my a6/z6 t3 setup. alot of people say they spray bad. but even with a sucky spray pattern they will be better than my stock 240 cc injectors
https://www.homemadeturbo.com/forum/...?topic=99028.0 |
Re: rx7 injectors
you will also need the clips. these injectors have an oval type clip
|
Re: rx7 injectors
Saturated is what i have i was hopeing for peak and holds
mine are like this one in the link http://injector-rehab.com/images/inj...95500-1350.jpg |
Re: rx7 injectors
according to this lik these are peak and hold
1986-87 RX-7 195500-1350 Peak and Hold 460cc Red Top http://www.robietherobot.com/storm/f...ectorguide.htm |
Re: rx7 injectors
they test out at 12ohms
|
Re: rx7 injectors
ya just test them out.... with a ohm meter it will tell you all you need to know cuz some are about 5 ohms and others are 12.9 13
and google search the part number you can find as much info as you will ever need |
Re: rx7 injectors
|
Re: rx7 injectors
damn, now i gotta check mine.
|
Re: rx7 injectors
Originally Posted by turbo4life
ya just test them out.... with a ohm meter it will tell you all you need to know cuz some are about 5 ohms and others are 12.9 13
and google search the part number you can find as much info as you will ever need Low imp. injectors =2-3ohm High imp. injectors =11-13 ohms God I feel dumber every time I read one of your posts. No offense. :P Im just a Dennis Leary -------. |
Re: rx7 injectors
i have Saturated
|
Re: rx7 injectors
Originally Posted by camando4000
i just Saturated my pants.
|
All times are GMT -5. The time now is 04:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands