hondafreek

Has anyone on here had experience with mazda rx-7 injectors. They look like they could work and they come in higher flow ratings than the dsm's. Hell there are even high and low impedence versions of them through the model years.

TurboBanshee420

www.injectorsonline.com

Get yourself some matched injectors from here. These guys helped me out big time! I got the wrong ones the firest time around and they took those back no charge and sent me the ones I needed for nothing and gave me a set of pigtails for free! Most definelty the best people I've ever dealt with.

Rx-7 injectors are the same as lt-1(camero/corvette/chevy truck) injectors and many other cars as well.

google is your friend!!! look around before you commit

hondafreek

Thanx for the help. The website seems to say that the rx-7 injectors would be compatible with dsm's and nissan injectors so I should be able to use them.

TurboBanshee420

WATCH OUT FOR MISMATCHING SETS.....HIGH...LOW IMP.!!!!!

Bring an ohm meter with you. if the resistance between the contacts is lower than 12 ohms, then it's a LOW IMP.

MiroslavB

my friend runs 550cc rx7 injectors in his teggy and they fit just fine

Ludique

X 2

Be careful with that. Same injector model, different years, different impedance.

dcg9381

I've got 87-88 RX7 Turbo II injectors. I just had them cleaned, flow tested, and new rubber/pintles.
Never used.. I dont recall if they're 530 or 550cc - but make me a deal! I've got receipts and flow results.

Generally speaking, if they'll work in the rail and they're the same impedance, they'll be fine.
You'll have to retune, of course.. pay attention, noobs.