Forced Induction Custom FI Setup Questions

Running on Basemap?

Thread Tools
 
Search this Thread
 
Old Oct 31, 2007 | 08:14 PM
  #1  
inthad's Avatar
Thread Starter
0.5 BAR
 
Joined: Feb 2007
Posts: 107
Default Running on Basemap?


I was wondering if I can run the car as DD with a basemap from Phearable.net?
I will be running the car for about 3 weeks before tuning. What do you guys suggest.
Thanks
Old Oct 31, 2007 | 08:25 PM
  #2  
michigan_soler's Avatar
1.0 BAR
 
Joined: Aug 2005
Posts: 334
Default Re: Running on Basemap?

set up might be nice...
Old Oct 31, 2007 | 08:30 PM
  #3  
inthad's Avatar
Thread Starter
0.5 BAR
 
Joined: Feb 2007
Posts: 107
Default Re: Running on Basemap?

garrett 50 trim a/r .48 t03/t4
450cc dsm w/ resistor box
3" dp w/ 3" Exhaust
meutek manifold
2.5 piping
ebay intercooler
sealthmode oil line
xs rlf bov
38mm WG
Old Oct 31, 2007 | 09:20 PM
  #5  
TorganFM's Avatar
3.0 BAR
 
Joined: Oct 2003
Posts: 3,696
From: Your mom's panties
Default Re: Running on Basemap?

I'm running ****'s 14b basemap on my car, have been for a few months. I had to richen up the idle and cruise, that ---- was like 20:1. I just say be careful of pimping basemaps too hard, they'll break you down.
Old Oct 31, 2007 | 11:42 PM
  #6  
igotnothin's Avatar
1.5 BAR
 
Joined: Nov 2005
Posts: 1,241
From: Harford Co. MD
Default Re: Running on Basemap?

i drove on a base map from xenocron, for a little while, needed to take care of some leaks, and what not, so it saw a little boost,.... like everyone is saying, dont rip on it and you should be fine.
Old Nov 1, 2007 | 12:22 AM
  #7  
95_civic_lx's Avatar
1.0 BAR
 
Joined: Mar 2006
Posts: 519
Default Re: Running on Basemap?

i got a basemap from xeno and ran it in the track....---- made it home in one piece....this was a d15 on 10psi. I bet its rich but it held.
Old Nov 1, 2007 | 08:29 AM
  #8  
TorganFM's Avatar
3.0 BAR
 
Joined: Oct 2003
Posts: 3,696
From: Your mom's panties
Default Re: Running on Basemap?

I rip on ****'s all the time. According to my wideband I have it rich all over now, and I retarded the dizzy a couple degrees, so I'm not worrying too much.
Old Nov 1, 2007 | 11:09 AM
  #9  
inthad's Avatar
Thread Starter
0.5 BAR
 
Joined: Feb 2007
Posts: 107
Default Re: Running on Basemap?

i'm only running 7psi....and its a .48 a/r turbine. trying not to hit boost is every hard.lol

so, i'm gonna be driving this setup for about 3 weeks before i can get it to the tuner. its safe?
Old Nov 1, 2007 | 02:33 PM
  #10  
imburne's Avatar
3.0 BAR
 
Joined: Jun 2006
Posts: 3,256
Default Re: Running on Basemap?

Been done 1000 times. If the map is off pretty bad you will hear it in the motor.



All times are GMT -5. The time now is 05:26 AM.