|
rotating my TD04L
man this td04L is a b*tch to rotate, Ive removed the huge clamp in the centre as far as i know i have to then remove the exhaust housing, but how the funk do i do that? this bitch wont move anyone whos done this have tips?
|
Re: rotating my TD04L
i like mexican food
|
Re: rotating my TD04L
Take the Bolt out from the Oil feed, and loosen the huge clap, im doing it to mine right now. unless the seals has tightentsed or got clogged/caked up or somthing...mine is tdo4hl
|
Re: rotating my TD04L
I now the magic trick but since people will just take credit for my ideas they can learn on there own
|
Re: rotating my TD04L
Use a torch.
|
Re: rotating my TD04L
i used a torch and still cant see any light bcuz ur mumas hairy ass blocking the way, and i used your boy-friends trick and took credit for ------ his sister up the arse...
now as for that bolt ive loostened it and taken of the clamp but no luck what else u trying? |
Re: rotating my TD04L
So let me get this straight. This is a v-band exhaust housing? You took the clamp off, but you can't get the housing to budge? Maybe if you were more descriptive or took pictures we would be able to help you better.
Don't flame people trying to help you noob. This site doesn't take kindly to noobs anyway, never mind little bitchy ones like you. |
Re: rotating my TD04L
for anyone in same situation who doesnt wanna put up with stuck up people with a torch fetish etc lol heres a good link:
http://www.austarletclub.com/article...st_housing.php i got it to work, pm me if u need any help. |
Re: rotating my TD04L
the simple fact that you needed help for that makes you a retard and you shouldnt even atempt to turbo your car
|
Re: rotating my TD04L
and oh yea this post was 1 above yours dumb ----
https://www.homemadeturbo.com/forum/...?topic=13035.0 |
Re: rotating my TD04L
i had to hammer both my wrx turbo exhaust housings off. the exhaust housings are vband but the housing tight slips over a part of the center section = they rust together.
take a brass hammer and lightly and evenly hammer the housing off. keep the housing close to a table so it doesn't drop 5 feet. thats the hmt way -Luke |
Re: rotating my TD04L
when I did my RHB5, after I got the bolts out of the housing and the two plates off, I hammered the ---- out of it and it didn't budge. I even soaked it in PB blaster, didn't help. Then I just took an acetylene torch (no oxygen) and heated the housing. It practically fell off after expanding from the heat.
Originally Posted by bored
stuck up people with a torch fetish etc
|
Re: rotating my TD04L
Originally Posted by E-b0la
when I did my RHB5, after I got the bolts out of the housing and the two plates off, I hammered the ---- out of it and it didn't budge. I even soaked it in PB blaster, didn't help. Then I just took an acetylene torch (no oxygen) and heated the housing. It practically fell off after expanding from the heat.
Stuck up huh? I'm just trying to save you work by doing it the easy way you retarded ----. Go ahead and hammer till you're blue in the face. If it's rusted on enough it won't budge. A torch is an easy way to get a rusty housing off of a center section. If you don't want to follow my advice, then ---- off. -Luke |
Re: rotating my TD04L
done.
|
Re: rotating my TD04L
Originally Posted by bored
done.
i was wondering how to come about this,,,, |
Re: rotating my TD04L
no probs .
|
| All times are GMT -5. The time now is 07:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands