Rotating 14b housing.
 

How do I do it? Remove the little copper circle thing then what?

Re:Rotating 14b housing.
 

Just give it a little tap tap ;)

Re:Rotating 14b housing.
 

I wanted to know the same damn thing . . . how do you clock a 14b turbo? Most all the other turbos have bolts, but the 14b does not. i ehard that there is a clip that you need to compress with a set of pliars or something of the nature, pull that out and rotate the compressor housing.

Re:Rotating 14b housing.
 

Jeff said take the circle thing off. Turn the turbo on its side. Tap the bottom of the compressor with a hammer. Then itll break loose. Shave the dowel pin down. Clock, then put it back together.

Re:Rotating 14b housing.
 

there is a dowel on the exhaust side of a 14b. yes take the ring off (the one with the locknut). buy a good set of snap ring plyiers to get the cold side ring off. and look out that thing nearly owned my face!

Re:Rotating 14b housing.
 

stupid snap ring pliers werent large enough that i bought at lordco
now the ring is jam lol