resleaving + posting = overkill?
 

I was just brainstorming over this...would it be worthwhile to get a D16A6 resleaved with ductile iron and then post the block as well? I was just checking JG's internet specials and it occurred to me, "Why not post the block as well, sorta how Golden Eagle has the Tangs on its resleaved blocks?"

the tangs: http://www.overboost.com/story.asp?id=464

Of course, to justify this being in the FI section, lemme add this...this engine would see "one hundred BILLION" PSI. Yah ::) :P

Re:resleaving + posting = overkill?
 

it'd be worth it if you were building a racecar...

Re:resleaving + posting = overkill?
 

hell no then you can run my 15 psi. i so would do that idf I had money

might rather do on ZC tho its a better platform and when spending serious cash I would prolly upgrade

Re:resleaving + posting = overkill?
 

Good ol' Corolla... All Iron, nice, big reinforced deck surface...

Re:resleaving + posting = overkill?
 

Hey hey hey.. a built single came can take a much boost as a built DOHC.. the only difference is the tuning ability.. think about running an 11 second single cam on 18psi.. Ooooo.. the domestic boys' jaws would drop!