resistor box install?
 

just wondering if anyone can give me some help wiring a resistor box into a 00 si which wires are for which injector on the plug end 4 red and blacks and 1 yellow and black

Re:resistor box install?
 

Not to be a dick but you should have read the FAQ...
Heres a link anyways.
http://www.honda-tech.com/zerothread?id=736737

Re:resistor box install?
 

don't install a resistor box install them between the yellow/black wire and cover them with wire loom. the resistors don't get hot.

Re:resistor box install?
 

thanks for your help I also found that after I posted thanks

Re:resistor box install?
 

Why not Install a resistor box?

Re:resistor box install?
 

if you have a resistor box, use it instead of the inline resistors.

Re:resistor box install?
 

okay i was actually gunna post about installin inline resistors... but since its brought up (sorry to hijack) can someone post a diagram or instructions on how to install them inline, like what to install and such thanx...

Re:resistor box install?
 

you just get 4 - 10w10k resistors from radio slack and put them inline with each injector power wire (yellow w/black stripe) right by where the wires plug in to the injectors.

or you can just look here :P
https://www.homemadeturbo.com/tech_p...ors/index.html

Re:resistor box install?
 

humm...i will find this thread very useful. thanks for making it a good one. ;)

Re:resistor box install?
 

Thanks project, i search and couldnt find that...

Re:resistor box install?
 

these right???
http://www.radioshack.com/product.as...5Fid=271%2D132

Re:resistor box install?
 

yeah, those are right, the ones i got look a little different though, they're solid white. they usually have them in stock at your local shack.

Re:resistor box install?
 

do they have to be soldered or can they be but connected?? i know ghetto Q but i gotta ask...??

Re:resistor box install?
 

i would suggest soldering them in, it only takes a second. they don't have reg wires that you can just twist together. you could maybe use some wire nut, but then it will look all ghetto and lumpy when you tape them up. you can get a cheapy soldering gun for like 5-10 bucks.