rc 440's not pluging in????
 

I have a 94 sol, t3/t4, AEM ems, 225 walbro. So it was warm today and disided to install my new rc injectors. everything was cool till I go to plug in the wiers and no go.... I remember reading some thing about this awile ago and did a search on it but got nothing. Anybody know whats up??

Thanks .

Re:rc 440's not pluging in????
 

u might have to snip off the little tab on the clips..

but i am not sure.. why wont they fit??

Re:rc 440's not pluging in????
 

negitive captin. she wont go! Yea, it has a little purtruding plastic part that the stock ones dont have, just cut' um you say???

Re:rc 440's not pluging in????
 

yes u can cut them... are you sure there for ur obd

Re:rc 440's not pluging in????
 

sounds like obd 0 injectors.

Re:rc 440's not pluging in????
 

RC 440's you should have to cut anything since you do have a 94 sol...

It should be pretty much plug and play with those injectors. Did you double check and see if you got the right ones?

Re:rc 440's not pluging in????
 

i told the guy at importparts.com what i had and he seemd to know what he was doing.

on an other note, my friend swaped a b16 in his 89 crx si and his d16 is sitting in the shop and i noticed those injetors looked just like the rc's, SO.. there prob just an older odb, but can i still use them...? i do have an AEM ems..

Re:rc 440's not pluging in????
 

should be ok just as long as hte clips will sit in right