ran into a problem
 

so i decided to sell my HF mani and go with a log mani from csaddict. but the thing is when i bolted my adapter plate to the mani i had to use a bolt from the top, put a nut on the bottom and tighten till the bolt came all the way through, dremel the head of the bolt off and continue to tighten untill the bolt no longer stuck out higher than the adapter plate. the problem is i no longer need the adapter plate, so i took it off. and now the nut is pretty much impossible to tighten to allow the bolt to come out completely from the other side. i might try havin someone tap it out, but before i do, does anyone else have any suggestions?

http://memimage.cardomain.net/member...91_97_full.jpg

Re: ran into a problem
 

Why can't you just tighten the nut with a combination wrench?

Re: ran into a problem