quick turbo install question, bare with me
#1
quick turbo install question, bare with me
i know that on a crx theres very little space between the block and the front crossmember... but to anyone who has tried, would i be able to bolt up a dsm t25 turbo(w/ hf mani) using the stock eclipse downpipe and 02 housing without it hitting the front crossmember?
#2
Re: quick turbo install question, bare with me
I used the stock O2 housing on my 90 hatch but that involved cutting/bashing the crossmember in and the stock downpipe I recall is not even clost to fitting.Do you have a welder?Now would be the time to buy a cheap fluxcore and get a downpipe flange and build your own downpipe.
#4
Re: quick turbo install question, bare with me
Basically yes.The best way is to cut a section out to make room and weld it back up but Im not sure if you have a welder.I cut the lip and a section of box and then welded a patch piece back in as it is a strucural piece on the older 88-91's.Buying some traction bars would solve all your problems and LSD Motorsports sells some for pretty cheap.
Thread
Thread Starter
Forum
Replies
Last Post
pa2play
Forced Induction
10
05-10-2004 05:25 PM