Quick question about 14b turbo oile lines
Ok heres a simple question I have a 14b td05h and was wondering if the return line hole will always be bigger than the feed line hole in the turbo also what size will the return line hole be for one of flanges with a male fitting.
|
Re: Quick question about 14b turbo oile lines
You can find just the oil drain line fitting that goes on the bottom of the turbo from any DSM vendor, such as Road Race Engineering, Buschur, DSMotorsport, etc. I believe even Stealthmode on here would carry the fitting, or possibly even an entire kit for you to use. Otherwise you can just email any dsm vendor and they will more than likely have the little fitting for a 14b, then get some good hosing and attach it to the barbed end of that fitting and route it down to where ever it is you are draining to. Try to keep it a nice and simple route, and make sure the hosing has a decent sized inner diameter or else you may cause oil to get backed up in your turbo causing you to smoke a lil bit!
|
Re: Quick question about 14b turbo oile lines
what about tuner toyz
|
Re: Quick question about 14b turbo oile lines
http://www.---------------------------/oil.shtml
Look man, that's everything you'd need, right from Stealthmode. |
Re: Quick question about 14b turbo oile lines
thanks for the link ;D
|
All times are GMT -5. The time now is 11:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands