HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   quick injector question (https://www.homemadeturbo.com/forced-induction-7/quick-injector-question-85095/)

eshaw 10-18-2007 09:35 PM

quick injector question
 
So I've been under the impression that, shooting for 200whp, I should go with 42# injectors.

I just re-read the section of Maximum Boost that talks about injectors, and it appears as if I could get away with something smaller.
It says that:

pounds of fuel per hour per injector = (expected bhp * 0.55) / number of injectors

So, saying 250 bhp just to be safe, I would get:
(250 * .55) / 4 = 34.375 lb/hr

Terminators came stock with 39# injectors, and I bet I could get them for a lot cheaper and easier than green top 42# injecotrs.


Does all this look right? Will I be safe going with 39# injectors instead of 42# ones?

ifly87 10-18-2007 10:25 PM

Re: quick injector question
 
450's are $5 a peice in da junkyard and will support almolst 300hp, just roll with the 450's, tested and proven by hmt's finest

eshaw 10-18-2007 11:37 PM

Re: quick injector question
 
I totally would, but this is for a Focus, not a Honda. I need high impedance and a certain plug style (Bosch EV1). At least I think it's EV1. It's either that or EV6. Either way, I'm pretty much stuck with buying injectors that came off of Terminators and Lightnings or injectors made for Ford vehicles.

G2TegGuy 10-19-2007 02:09 AM

Re: quick injector question
 
top feed or side feed?

bitchasscracker 10-19-2007 02:32 AM

Re: quick injector question
 
you ever ben to focaljet ??


how are you going to control these bigger injectors ??


talk to kamilk69 on here he seems to know his ---- when it comes to a turbo focus

eshaw 10-19-2007 02:54 PM

Re: quick injector question
 

Originally Posted by bitchasscracker
you ever ben to focaljet ??


how are you going to control these bigger injectors ??


talk to kamilk69 on here he seems to know his ---- when it comes to a turbo focus

Yes, I hate those fuckers over there. Way too many of them are, "No, don't do it yourself, spend $4,000 on a kit and pay somebody to hold your hand and install it for you."


I'm ordering a chip from JMS chips once I've collected absolutely everything else needed for the build. I'll tell them what I have done already (just a 65mm tb) and what every single component of my turbo setup will be, and they'll make me 3 tunes.


And, yeah, I've been talking with him a little. He's helped a lot so far.

eshaw 10-19-2007 02:56 PM

Re: quick injector question
 
I think I may have found some green tops for $75, which is doable and actually a steal for those things, so this thread might be moot now.


All times are GMT -5. The time now is 10:39 AM.


© 2024 MH Sub I, LLC dba Internet Brands