Quick easy simple question about dsm injectors
 

So anyways.

I got a seal kit and some injectors. Which seal do I bore out for the manifold? I know there are the two top seals, but then there are two left with the same diameter just a different height. I know I could just look at the manifold but i'm in the apartment bored and want to dremel them out.

So which seal? the shorter or taller one? Give me a good answer and i'll post some porn.

Re: Quick easy simple question about dsm injectors
 

if you are bored bore both out, then use whichever fits better in your manifold. usually the shorter ones fit better.

Re: Quick easy simple question about dsm injectors
 

nirvana is the shiz.

Re: Quick easy simple question about dsm injectors
 

NO WAY, kurt cobain was a drugged out ------- hippy wannabe. i just look like him in that pic, so i used it since it was easy.

Re: Quick easy simple question about dsm injectors
 

I didn't say anything bout kurt, just nirvana :P

well I don't really know how much to bore them out but they're all bored...

Re: Quick easy simple question about dsm injectors
 

Remove the black o-rings / seals on the dsm injectors
Now bore the original seals that came of your 240's injectors , and use those to replace the original dsm seals