salsero_utah

I have a t3 turbo from 300 zx the wastegate wasn't working. can I used the wastegate from a 14b and the question is will that work fine or I may have a any type of boost problem? what different it will do if I use the 14b wastegate any tips will apreciate

udaredme

why not run an external wastegate?

salsero_utah

we'll I have a hf manifold so that's so that's the only option that I have for now

xternal

Run external.Best way to eliminate boost creep

salsero_utah

yeah I know it will be better if I run a external wastegate my question was if the stock t3 turbo wastegate I not working and I have a wastegate from 14b will it work the same that having the stock t3 wastegate ?

AJxr

i doubt it will fit. do you know exactly what wasnt working? the flapper? actuator? i have a spare t3 actuator from a chrysler new yorker that would work with a little finagling and im sure you can find an o2 housing with a good flapper somewhere on here or ebay.

salsero_utah

what I did I'd I cut the 14b actuator on the middle of the pin for about 2 inches and weld it together so the wastegate is all of way close just like a normal internal wastegate my question was will that affect my boost in any way or the way or it will be better if I get the stock t3 wastegate

AJxr

5.5 psi i remember correctly, just make your self a manual boost controller. i did works mint.