pvc system
drill a hole thru pvc valve and let it drain?? good ?? bad ??
|
Re: pvc system
anyone ??
|
Re: pvc system
you cant just drill a hole in the PCV valve, it has the little ball inside it for a reason.
|
Re: pvc system
Originally Posted by Xgenturbo
you cant just drill a hole in the PCV valve, it has the little ball inside it for a reason.
|
Re: pvc system
And what does plastic plumbing pipe have to do with your car? :-*
|
Re: pvc system
i really need some help b/c I DONT KNOW. let me why or why not.
PLEASE :'( |
Re: pvc system
The valve has a ball and spring inside. You can use a knife or hacksaw and cut off about 1-2 mm off the PCV valve and take out the ball and spring. This is what I did for my turbo setup and it works like a charm. Search the FAQ and you'll see a couple illustrations about this modification.
|
Re: pvc system
Originally Posted by StanB
The valve has a ball and spring inside. You can use a knife or hacksaw and cut off about 1-2 mm off the PCV valve and take out the ball and spring. This is what I did for my turbo setup and it works like a charm. Search the FAQ and you'll see a couple illustrations about this modification.
|
Re: pvc system
Originally Posted by zex_cool
what i did was i just drilled through the valve and attached some hose, so that it drains underneath the car. so my question is will this cause any problems ??
|
Re: pvc system
Its a PCV (Positive Crank Vent) not PVC (plastic toilet plumbing).
Some people use a slash cut exhaust evac method to draw vacuum from the crank to expel blow-by. The reason people disconnect the PCV ( or use a catch can ), is to allow the crank to breathe, and having it connected to the IM the crank would be under boost which can damage the bottom of the engine. |
All times are GMT -5. The time now is 05:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands